[Thu Mar 15 14:32:40 2012] Detection parameters:
  Position = (279.7, 252.5) = 9 18 4.38 -12 7 3.9
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 94.9 +/- 14.9
  Background counts = 270.9
  Rate = 0.03 +/- 0.004

[Thu Mar 15 14:32:41 2012] Off-axis axis estimate = 3.59'
[Thu Mar 15 14:33:49 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 14:33:49 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Thu Mar 15 14:33:49 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.656
[Thu Mar 15 14:33:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.23"
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 14:52:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 14:52:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 14:52:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 14:52:16 2012] Fit fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 15 15:10:38 2012] Spatial fit model total counts = 1117.990000, observed total counts = 1076.000000
[Thu Mar 15 15:10:38 2012] Offset between fit and detection position for source 1 = 8.813919 pixels
[Thu Mar 15 15:10:38 2012] 1136.458000 total counts/ 974.437000 bgd. counts: snr = 5.190323
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 8.813919 pixels
  Position = (285.0, 245.4) = 9 18 2.83 -12 7 31.0
  Extent = 16.5 (16.4-32.9)", rotation angle = 0
  Source counts = 162.0 +/- 33.7
  Background counts = 974.4
  Rate = 0.04 +/- 0.008
[Thu Mar 15 15:10:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:10:38 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:10:38 2012] Source does appear to be extended
[Thu Mar 15 15:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:10:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:10:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 15:10:45 2012] Initial guess for spatial extent in simple fitting = 16.45"
[Thu Mar 15 15:10:45 2012] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.982
[Thu Mar 15 15:10:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 16.45"
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 15:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 15:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 15:30:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 15:30:52 2012] Fit fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 15 15:45:26 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Thu Mar 15 15:45:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:45:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:45:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:45:26 2012] Source does appear to be extended
[Thu Mar 15 15:45:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:45:32 2012] XMMSAS src. selection expression = ellipse(24742.766000, 21304.484000, 987.024028, 987.024028, 0.000000, X, Y)
[Thu Mar 15 15:45:32 2012] Writing source region out to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 15 15:45:32 2012] Extracting stamp from image fullrun_mos1_xmm0109980501_pi300-10000_cl_sm2.00.img.gz, (228, 189) - (342, 302)
[Thu Mar 15 15:45:32 2012] XMMSAS bgd. selection expression = annulus(24742.766000, 21304.484000, 1645.040047, 3290.080095, X, Y) && !ellipse(23782.356240, 23474.691800, 1240.808036, 1240.808036, 0.000000, X, Y) && !ellipse(24964.411530, 24560.724945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.476000, 21997.538000, 1352.232039, 1352.232039, 0.000000, X, Y) && !ellipse(23074.320000, 23006.284000, 1352.232039, 1352.232039, 0.000000, X, Y) && !ellipse(24713.901550, 24977.094604, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 15:45:32 2012] Writing fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1.gif
[Thu Mar 15 15:45:36 2012] Mean detx,y = (2383.61, 1364.16) 
[Thu Mar 15 15:45:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 15:45:57 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 15:45:57 2012] Setting source spectrum file to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 15:45:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 15 18:41:23 2012] Updating aperture counts using extracted products
[Thu Mar 15 18:41:23 2012] Error reading totcts from fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 15 18:41:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 18:41:23 2012] Using photon index=1.80, rate=0.0372, arf fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 18:41:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 18:41:23 2012] Updating source flux to 3.5e-13
[Thu Mar 15 18:42:11 2012] Reading fit data from xmm0109980501/analysis//spectral/fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 15 18:42:11 2012] Spectral fit parameter nH value = 1.37537e+21
[Thu Mar 15 18:42:11 2012] Spectral fit parameter PhoIndex value = 2.51243
[Thu Mar 15 18:42:11 2012] Failed to get F(0.3-8.0) from xmm0109980501/analysis//spectral/fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 18:42:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 18:42:11 2012] Using Nh = 1.4e+21, photon index=2.51, rate=0.0372, arf fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src1.arf
[Thu Mar 15 18:42:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 18:42:11 2012] Updating source flux to 3e-13