[Tue Sep  4 21:38:00 2012] Detection parameters:
  Position = (265.4, 237.9) = 9 18 8.61 -12 7 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.1 +/- 35.2
  Background counts = 547.6
  Rate = 0.03 +/- 0.002

[Tue Sep  4 21:38:00 2012] Off-axis axis estimate = 5.00'
[Tue Sep  4 21:41:04 2012] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 21:41:04 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Sep  4 21:41:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.806
[Tue Sep  4 21:41:04 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.93"
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49.csv
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49.csv
[Tue Sep  4 23:29:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue Sep  4 23:29:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:19:33 2012] Source 53 is offset by 1.038000 and -0.503273 pixels which is larger than
2 X fitted extent = 1.029880 x 1.029880, not incorporating fit results
[Wed Sep  5 01:19:33 2012] Spatial fit model total counts = 6243.840000, observed total counts = 6183.000000
[Wed Sep  5 01:19:33 2012] Offset between fit and detection position for source 53 = 1.158600 pixels
[Wed Sep  5 01:19:33 2012] Warning, changing simple spatial fit ID from 49 to 50
[Wed Sep  5 01:19:33 2012] 6425.257200 total counts/ 6380.120000 bgd. counts: snr = 0.565093
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 1.158600 pixels
  Position = (264.4, 238.4) = 9 18 8.92 -12 8 1.8
  Extent = 2.4 (2.3-11.4)", rotation angle = 0
  Source counts = 45.1 +/- 80.2
  Background counts = 6380.1
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability