[Tue Sep  4 21:38:00 2012] Detection parameters:
  Position = (259.8, 247.1) = 9 18 10.29 -12 7 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 601.4 +/- 38.7
  Background counts = 673.3
  Rate = 0.04 +/- 0.002

[Tue Sep  4 21:38:00 2012] Off-axis axis estimate = 4.66'
[Tue Sep  4 21:41:04 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 21:41:04 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Tue Sep  4 21:41:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.950
[Tue Sep  4 21:41:04 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 8.76"
[Tue Sep  4 23:29:16 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38.ximg exists
[Tue Sep  4 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38.csv
[Tue Sep  4 23:29:16 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Sep  4 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38.csv
[Tue Sep  4 23:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Sep  4 23:29:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue Sep  4 23:29:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:19:33 2012] Spatial fit model total counts = 6267.860000, observed total counts = 6882.000000
[Wed Sep  5 01:19:33 2012] Offset between fit and detection position for source 42 = 1.681560 pixels
[Wed Sep  5 01:19:33 2012] Warning, changing simple spatial fit ID from 38 to 34
[Wed Sep  5 01:19:33 2012] 12380.110000 total counts/ 10110.800000 bgd. counts: snr = 22.568415
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.681560 pixels
  Position = (261.1, 248.1) = 9 18 9.88 -12 7 19.6
  Extent = 17.3" x 15.6", rotation angle = 98
  Source counts = 2269.3 +/- 111.3
  Background counts = 10110.8
  Rate = 0.09 +/- 0.004
[Wed Sep  5 01:19:33 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:33 2012] Assessing source extent using major
[Wed Sep  5 01:19:33 2012] Source does appear to be extended
[Wed Sep  5 01:19:33 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Wed Sep  5 01:19:33 2012] Source is confused with source 37
[Wed Sep  5 01:19:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 01:19:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 01:19:51 2012] Initial guess for spatial extent in simple fitting = 16.44"
[Wed Sep  5 01:19:51 2012] source mask rpix=3.8, npix_max = 73, mask sum = 39, frac = 0.532
[Wed Sep  5 01:19:51 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 16.44"
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26.csv
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26.csv
[Wed Sep  5 08:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Sep  5 08:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:28:35 2012] Warning, spatial fit 26 centroid is now closest to src. 37
[Wed Sep  5 12:28:35 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:35 2012] Assessing source extent using major
[Wed Sep  5 12:28:35 2012] Source does appear to be extended
[Wed Sep  5 12:28:35 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Wed Sep  5 12:28:54 2012] Counts = 2269.310000, rescaling region sizes by 2.000000
[Wed Sep  5 12:28:54 2012] XMMSAS src. selection expression = ellipse(22670.478201, 21532.412848, 2073.264060, 1872.917801, 98.222250, X, Y)
[Wed Sep  5 12:28:54 2012] Writing source region out to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42_src.reg
[Wed Sep  5 12:28:54 2012] Extracting stamp from image fullrun_pn_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (142, 129) - (380, 367)
[Wed Sep  5 12:28:54 2012] XMMSAS bgd. selection expression = annulus(22670.478201, 21532.412848, 6910.880199, 13821.760398, X, Y) && !ellipse(23817.294400, 23473.496800, 3738.816108, 3738.816108, 0.000000, X, Y) && !ellipse(26203.179169, 29150.139557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.491760, 27327.153961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25809.740997, 27098.524078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24122.495400, 25906.116000, 1160.768033, 1160.768033, 0.000000, X, Y) && !ellipse(26438.964355, 26388.009033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.798950, 25790.343353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22366.061798, 25777.123962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21912.577484, 25269.469086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.341827, 25240.704498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.524231, 25257.646240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19743.998672, 24914.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26606.289612, 24580.366852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.871857, 24570.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18994.528200, 24752.164200, 417.368012, 417.368012, 0.000000, X, Y) && !ellipse(21519.538895, 24192.822845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26055.828000, 24151.406000, 802.432023, 802.432023, 0.000000, X, Y) && !ellipse(11433.232605, 24314.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21304.238586, 23619.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21747.670959, 23234.455505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.232000, 22523.970000, 1214.624035, 1214.624035, 0.000000, X, Y) && !ellipse(26011.252411, 22806.332031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.800308, 22152.142105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20369.266037, 21774.794739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.150116, 21447.916824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.733734, 22580.861633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21635.679169, 21142.406586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.551361, 21094.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.665741, 20923.215332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22169.245804, 20497.092422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21321.581238, 20751.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.756000, 20314.612000, 1381.776040, 1381.776040, 0.000000, X, Y) && !ellipse(23843.266998, 20069.542435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.947205, 20145.683365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23567.170502, 19789.143463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27426.789246, 17626.689804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32931.588400, 16052.897800, 549.211216, 549.211216, 0.000000, X, Y) && !ellipse(20546.364456, 13711.565018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15635.810776, 12729.800232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23796.637680, 7315.796200, 587.737777, 587.737777, 0.000000, X, Y)
[Wed Sep  5 12:28:54 2012] Writing fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42.gif
[Wed Sep  5 12:58:52 2012] Mean detx,y = (2865.16, -949.77) 
[Wed Sep  5 12:58:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:04:43 2012] grppha failed
[Wed Sep  5 13:04:43 2012] Setting source spectrum file to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42_src.pi.gz
[Wed Sep  5 13:04:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42_src.pi.gz
[Wed Sep  5 13:53:39 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:43 2012] Flag c found in src. 42 procflags, skipping spectral fitting
[Wed Sep  5 13:53:43 2012] Source 42 has no response, skipping
[Wed Sep  5 13:53:44 2012] xmm0109980301/analysis//spectral/fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete