[Tue Sep  4 21:37:59 2012] Detection parameters:
  Position = (273.9, 270.0) = 9 18 6.09 -12 5 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43008.9 +/- 258.7
  Background counts = 1059.6
  Rate = 2 +/- 0.01

[Tue Sep  4 21:38:00 2012] Off-axis axis estimate = 2.72'
[Tue Sep  4 21:41:04 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 21:41:04 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Tue Sep  4 21:41:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.762
[Tue Sep  4 21:41:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.79"
[Tue Sep  4 23:29:16 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep  4 23:29:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 23:29:16 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep  4 23:29:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 23:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep  4 23:29:17 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep  4 23:29:17 2012] Fit fullrun_pn_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 01:19:33 2012] Spatial fit model total counts = 108133.000000, observed total counts = 114276.000000
[Wed Sep  5 01:19:33 2012] Offset between fit and detection position for source 1 = 0.535136 pixels
[Wed Sep  5 01:19:33 2012] 107829.800000 total counts/ 25600.000000 bgd. counts: snr = 513.936250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.535136 pixels
  Position = (274.3, 270.4) = 9 18 5.97 -12 5 42.6
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 82229.8 +/- 328.4
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Wed Sep  5 01:19:33 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:33 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 01:19:33 2012] Source does appear to be extended
[Wed Sep  5 01:19:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 01:19:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 01:19:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 01:19:51 2012] Initial guess for spatial extent in simple fitting = 15.58"
[Wed Sep  5 01:19:51 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.961
[Wed Sep  5 01:19:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.58"
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep  5 08:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 08:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep  5 08:49:33 2012] fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep  5 08:49:33 2012] Fit fullrun_pn_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep  5 12:28:33 2012] Warning, spatial fit 1 centroid is now closest to src. 21
[Wed Sep  5 12:28:35 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:35 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:35 2012] Source does appear to be extended
[Wed Sep  5 12:28:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:28:53 2012] Counts = 82229.800000, rescaling region sizes by 3.000000
[Wed Sep  5 12:28:53 2012] XMMSAS src. selection expression = ellipse(23817.294400, 23473.496800, 2804.112081, 2804.112081, 0.000000, X, Y)
[Wed Sep  5 12:28:53 2012] Writing source region out to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep  5 12:28:53 2012] Extracting stamp from image fullrun_pn_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (113, 109) - (435, 432)
[Wed Sep  5 12:28:54 2012] XMMSAS bgd. selection expression = annulus(23817.294400, 23473.496800, 14020.560403, 28041.120807, X, Y) && !ellipse(40867.590973, 30557.419250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26203.179169, 29150.139557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.491760, 27327.153961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25809.740997, 27098.524078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24122.495400, 25906.116000, 1160.768033, 1160.768033, 0.000000, X, Y) && !ellipse(26438.964355, 26388.009033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22800.798950, 25790.343353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22366.061798, 25777.123962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21912.577484, 25269.469086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.341827, 25240.704498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.524231, 25257.646240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19743.998672, 24914.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26606.289612, 24580.366852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.871857, 24570.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18994.528200, 24752.164200, 417.368012, 417.368012, 0.000000, X, Y) && !ellipse(21519.538895, 24192.822845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26055.828000, 24151.406000, 802.432023, 802.432023, 0.000000, X, Y) && !ellipse(11433.232605, 24314.686035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21304.238586, 23619.694946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21747.670959, 23234.455505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.232000, 22523.970000, 1214.624035, 1214.624035, 0.000000, X, Y) && !ellipse(26011.252411, 22806.332031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.800308, 22152.142105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20369.266037, 21774.794739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.150116, 21447.916824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.733734, 22580.861633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22670.478201, 21532.412848, 1382.176040, 1248.611868, 98.222250, X, Y) && !ellipse(21635.679169, 21142.406586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.551361, 21094.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.665741, 20923.215332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22169.245804, 20497.092422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21321.581238, 20751.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.756000, 20314.612000, 1381.776040, 1381.776040, 0.000000, X, Y) && !ellipse(23843.266998, 20069.542435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.947205, 20145.683365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23567.170502, 19789.143463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42525.752350, 18043.470993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27426.789246, 17626.689804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32931.588400, 16052.897800, 549.211216, 549.211216, 0.000000, X, Y) && !ellipse(20546.364456, 13711.565018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15635.810776, 12729.800232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23796.637680, 7315.796200, 587.737777, 587.737777, 0.000000, X, Y)
[Wed Sep  5 12:28:54 2012] Writing fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1.gif
[Wed Sep  5 12:29:25 2012] Mean detx,y = (1630.74, 15.06) 
[Wed Sep  5 12:29:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 12:39:22 2012] grppha failed
[Wed Sep  5 12:39:23 2012] Setting source spectrum file to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 12:39:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 13:53:39 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:43 2012] Source 1 has no response, skipping
[Wed Sep  5 13:53:44 2012] xmm0109980301/analysis//spectral/fullrun_pn_xmm0109980301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete