[Tue Sep 4 21:38:34 2012] Detection parameters: Position = (298.5, 296.8) = 9 17 58.79 -12 3 48.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 220.2 +/- 30.2 Background counts = 302.4 Rate = 0.007 +/- 0.001 [Tue Sep 4 21:38:34 2012] Off-axis axis estimate = 0.12' [Wed Sep 5 00:30:45 2012] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:30:45 2012] Initial guess for spatial extent in simple fitting = 6.49" [Wed Sep 5 00:30:45 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.009 [Wed Sep 5 00:30:45 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 6.49" [Wed Sep 5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14.ximg exists [Wed Sep 5 01:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14.csv [Wed Sep 5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14_1.ximg exists [Wed Sep 5 01:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14.csv [Wed Sep 5 01:19:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Wed Sep 5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Wed Sep 5 01:19:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly [Wed Sep 5 01:19:42 2012] Warning, spatial fit 14 centroid is now closest to src. 11 [Wed Sep 5 01:19:42 2012] Spatial fit model total counts = 3954.320000, observed total counts = 3886.000000 [Wed Sep 5 01:19:42 2012] Offset between fit and detection position for source 9 = 0.306853 pixels [Wed Sep 5 01:19:42 2012] Warning, changing simple spatial fit ID from 14 to 18 [Wed Sep 5 01:19:42 2012] 3702.807400 total counts/ 3654.440000 bgd. counts: snr = 0.800096 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.306853 pixels Position = (298.8, 296.6) = 9 17 58.72 -12 3 48.3 Extent = 3.1 (1.7-6.0)", rotation angle = 0 Source counts = 48.4 +/- 60.9 Background counts = 3654.4 Rate = 0.002 +/- 0.002 Deleting source due to low Poisson probability