[Tue Sep  4 21:38:34 2012] Detection parameters:
  Position = (270.2, 246.3) = 9 18 7.19 -12 7 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.5 +/- 33.4
  Background counts = 371.0
  Rate = 0.008 +/- 0.001

[Tue Sep  4 21:38:34 2012] Off-axis axis estimate = 4.30'
[Wed Sep  5 00:30:45 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:30:45 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Wed Sep  5 00:30:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.023
[Wed Sep  5 00:30:45 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.58"
[Wed Sep  5 01:19:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12.ximg exists
[Wed Sep  5 01:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 01:19:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Sep  5 01:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 01:19:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep  5 01:19:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Sep  5 01:19:42 2012] Spatial fit model total counts = 5292.140000, observed total counts = 5295.000000
[Wed Sep  5 01:19:42 2012] Offset between fit and detection position for source 24 = 8.134228 pixels
[Wed Sep  5 01:19:42 2012] 5285.547000 total counts/ 4795.080000 bgd. counts: snr = 7.082912
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 8.134228 pixels
  Position = (272.2, 254.1) = 9 18 6.59 -12 6 53.2
  Extent = 17.2 (17.1-34.3)", rotation angle = 0
  Source counts = 490.5 +/- 72.7
  Background counts = 4795.1
  Rate = 0.02 +/- 0.002
[Wed Sep  5 01:19:42 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:42 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 01:19:42 2012] Source does appear to be extended
[Wed Sep  5 01:19:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 10:12:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 10:12:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 10:12:18 2012] Initial guess for spatial extent in simple fitting = 17.16"
[Wed Sep  5 10:12:18 2012] source mask rpix=3.9, npix_max = 79, mask sum = 81, frac = 1.025
[Wed Sep  5 10:12:18 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 17.16"
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13.ximg exists
[Wed Sep  5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13.csv
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Sep  5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13.csv
[Wed Sep  5 12:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Sep  5 12:28:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Sep  5 12:28:44 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.456105 pixels away
[Wed Sep  5 12:28:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:44 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:44 2012] Source does appear to be extended
[Wed Sep  5 12:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 13:45:51 2012] XMMSAS src. selection expression = ellipse(23635.119600, 22061.686000, 1029.474030, 1029.474030, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing source region out to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24_src.reg
[Wed Sep  5 13:45:51 2012] Extracting stamp from image fullrun_mos2_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (213, 195) - (331, 313)
[Wed Sep  5 13:45:51 2012] XMMSAS bgd. selection expression = annulus(23635.119600, 22061.686000, 1715.790049, 3431.580099, X, Y) && !ellipse(23791.704000, 23505.564600, 5482.800158, 5482.800158, 0.000000, X, Y) && !ellipse(25132.898000, 23740.898000, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(25071.348000, 24549.348000, 784.660023, 784.660023, 0.000000, X, Y) && !ellipse(25875.040000, 24182.722000, 509.858415, 509.858415, 0.000000, X, Y) && !ellipse(25839.100311, 23796.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.790558, 25623.474762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 25028.923431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.954000, 21062.134000, 1418.360041, 1418.360041, 0.000000, X, Y) && !ellipse(26008.002655, 23376.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.783783, 22685.578644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24964.002655, 26306.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26494.645630, 25906.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.392000, 23749.777200, 1167.824034, 1167.824034, 0.000000, X, Y) && !ellipse(26214.532000, 24724.598000, 1141.064033, 1141.064033, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24.gif
[Wed Sep  5 13:52:08 2012] Mean detx,y = (-2152.17, 894.71) 
[Wed Sep  5 13:52:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:52:17 2012] grppha failed
[Wed Sep  5 13:52:17 2012] Setting source spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24_src.pi.gz
[Wed Sep  5 13:52:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Sep  5 13:53:40 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:40 2012] Error reading totcts from fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24_src.pi.gz
[Wed Sep  5 13:53:40 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:42 2012] Source 24 has no response, skipping
[Wed Sep  5 13:53:43 2012] xmm0109980301/analysis//spectral/fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete