[Tue Sep  4 21:38:34 2012] Detection parameters:
  Position = (305.8, 274.8) = 9 17 56.65 -12 5 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.8 +/- 29.7
  Background counts = 323.9
  Rate = 0.006 +/- 0.001

[Tue Sep  4 21:38:34 2012] Off-axis axis estimate = 1.79'
[Wed Sep  5 00:30:45 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:30:45 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Sep  5 00:30:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Sep  5 00:30:45 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.32"
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16.ximg exists
[Wed Sep  5 01:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16.csv
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Sep  5 01:19:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16.csv
[Wed Sep  5 01:19:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Sep  5 01:19:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Sep  5 01:19:42 2012] Warning, spatial fit 16 centroid is now closest to src. 15
[Wed Sep  5 01:19:42 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:42 2012] Assessing source extent using major
[Wed Sep  5 01:19:42 2012] Source does appear to be extended
[Wed Sep  5 01:19:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 10:12:18 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 10:12:18 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Sep  5 10:12:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Sep  5 10:12:18 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.32"
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15.ximg exists
[Wed Sep  5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Sep  5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15.csv
[Wed Sep  5 12:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Sep  5 12:28:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Sep  5 12:28:44 2012] Spatial fit model total counts = 4304.040000, observed total counts = 4317.000000
[Wed Sep  5 12:28:44 2012] Offset between fit and detection position for source 18 = 3.741505 pixels
[Wed Sep  5 12:28:44 2012] 3753.101000 total counts/ 3097.480000 bgd. counts: snr = 11.780090
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.741505 pixels
  Position = (302.3, 273.5) = 9 17 57.69 -12 5 28.8
  Extent = 14.6 (14.5-14.6)", rotation angle = 0
  Source counts = 655.6 +/- 61.3
  Background counts = 3097.5
  Rate = 0.02 +/- 0.002
[Wed Sep  5 12:28:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:44 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:44 2012] Source does appear to be extended
[Wed Sep  5 12:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:28:44 2012] Source is confused with source 15
[Wed Sep  5 12:28:44 2012] Source is confused with source 19
[Wed Sep  5 12:28:44 2012] Source is confused with source 20
[Wed Sep  5 13:45:51 2012] XMMSAS src. selection expression = ellipse(26247.392000, 23749.777200, 875.868025, 875.868025, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing source region out to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18_src.reg
[Wed Sep  5 13:45:51 2012] Extracting stamp from image fullrun_mos2_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (252, 223) - (353, 324)
[Wed Sep  5 13:45:51 2012] XMMSAS bgd. selection expression = annulus(26247.392000, 23749.777200, 1459.780042, 2919.560084, X, Y) && !ellipse(23791.704000, 23505.564600, 5482.800158, 5482.800158, 0.000000, X, Y) && !ellipse(25132.898000, 23740.898000, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(25071.348000, 24549.348000, 784.660023, 784.660023, 0.000000, X, Y) && !ellipse(25875.040000, 24182.722000, 509.858415, 509.858415, 0.000000, X, Y) && !ellipse(25839.100311, 23796.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.790558, 25623.474762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 25028.923431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.002655, 23376.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.783783, 22685.578644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24964.002655, 26306.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23635.119600, 22061.686000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(26494.645630, 25906.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.532000, 24724.598000, 1141.064033, 1141.064033, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18.gif
[Wed Sep  5 13:52:36 2012] Mean detx,y = (637.72, 465.96) 
[Wed Sep  5 13:52:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:52:44 2012] grppha failed
[Wed Sep  5 13:52:44 2012] Setting source spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18_src.pi.gz
[Wed Sep  5 13:52:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Sep  5 13:53:40 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:40 2012] Error reading totcts from fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18_src.pi.gz
[Wed Sep  5 13:53:40 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:42 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Wed Sep  5 13:53:42 2012] Source 18 has no response, skipping
[Wed Sep  5 13:53:43 2012] xmm0109980301/analysis//spectral/fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete