[Tue Sep 4 21:38:34 2012] Detection parameters: Position = (286.9, 278.0) = 9 18 2.23 -12 5 10.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1126.4 +/- 50.9 Background counts = 484.4 Rate = 0.04 +/- 0.002 [Tue Sep 4 21:38:34 2012] Off-axis axis estimate = 1.70' [Wed Sep 5 00:30:45 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:30:45 2012] Initial guess for spatial extent in simple fitting = 7.28" [Wed Sep 5 00:30:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 7, frac = 0.371 [Wed Sep 5 00:30:45 2012] Skipping simple spatial due to low active detector fraction [Wed Sep 5 01:19:42 2012] Spatial fit model total counts = 5904.410000, observed total counts = 5666.000000 [Wed Sep 5 01:19:42 2012] Offset between fit and detection position for source 17 = 5.038286 pixels [Wed Sep 5 01:19:42 2012] Warning, changing simple spatial fit ID from -1 to 5 [Wed Sep 5 01:19:42 2012] 5636.261000 total counts/ 5331.870000 bgd. counts: snr = 4.168617 Spatial fit parameters: Offset between fit and detection position for source 17 = 5.038286 pixels Position = (288.7, 282.7) = 9 18 1.70 -12 4 48.8 Extent = 10.3 (7.6-13.6)", rotation angle = 0 Source counts = 304.4 +/- 75.1 Background counts = 5331.9 Rate = 0.01 +/- 0.002 [Wed Sep 5 01:19:42 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 01:19:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 01:19:42 2012] Assessing source extent using major axis lower bound [Wed Sep 5 01:19:42 2012] Source does appear to be extended [Wed Sep 5 01:19:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 10:12:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 5 10:12:18 2012] Initial guess for spatial extent in simple fitting = 10.30" [Wed Sep 5 10:12:18 2012] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.065 [Wed Sep 5 10:12:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.30" [Wed Sep 5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3.ximg exists [Wed Sep 5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3.csv [Wed Sep 5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3_1.ximg exists [Wed Sep 5 12:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3.csv [Wed Sep 5 12:28:23 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Wed Sep 5 12:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed Sep 5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Wed Sep 5 12:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed Sep 5 12:28:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 12:28:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.051123 pixels away [Wed Sep 5 12:28:44 2012] Spatial fit model total counts = 5921.530000, observed total counts = 5666.000000 [Wed Sep 5 12:28:44 2012] Offset between fit and detection position for source 17 = 0.000000 pixels [Wed Sep 5 12:28:44 2012] Warning, changing simple spatial fit ID from 3 to 7 [Wed Sep 5 12:28:44 2012] 5710.853000 total counts/ 5458.340000 bgd. counts: snr = 3.417854 Spatial fit parameters: Offset between fit and detection position for source 17 = 0.000000 pixels Position = (288.7, 282.7) = 9 18 1.70 -12 4 48.8 Extent = 9.8 (7.2-13.6)", rotation angle = 0 Source counts = 252.5 +/- 75.6 Background counts = 5458.3 Rate = 0.008 +/- 0.002 [Wed Sep 5 12:28:44 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 12:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 12:28:44 2012] Assessing source extent using major axis lower bound [Wed Sep 5 12:28:44 2012] Source does appear to be extended [Wed Sep 5 12:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 13:45:51 2012] XMMSAS src. selection expression = ellipse(25071.348000, 24549.348000, 588.495017, 588.495017, 0.000000, X, Y) [Wed Sep 5 13:45:51 2012] Writing source region out to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17_src.reg [Wed Sep 5 13:45:51 2012] Extracting stamp from image fullrun_mos2_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (255, 249) - (323, 317) [Wed Sep 5 13:45:51 2012] XMMSAS bgd. selection expression = annulus(25071.348000, 24549.348000, 980.825028, 1961.650056, X, Y) && !ellipse(23791.704000, 23505.564600, 5482.800158, 5482.800158, 0.000000, X, Y) && !ellipse(25132.898000, 23740.898000, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(25875.040000, 24182.722000, 509.858415, 509.858415, 0.000000, X, Y) && !ellipse(25839.100311, 23796.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.790558, 25623.474762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 25028.923431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.002655, 23376.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.783783, 22685.578644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24964.002655, 26306.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23635.119600, 22061.686000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(26494.645630, 25906.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.392000, 23749.777200, 1167.824034, 1167.824034, 0.000000, X, Y) && !ellipse(26214.532000, 24724.598000, 1141.064033, 1141.064033, 0.000000, X, Y) [Wed Sep 5 13:45:51 2012] Writing fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17.gif [Wed Sep 5 13:48:54 2012] Mean detx,y = (-116.39, -619.29) [Wed Sep 5 13:48:55 2012] Setting backscal keywords in source and bgd. spectrum [Wed Sep 5 13:49:07 2012] grppha failed [Wed Sep 5 13:49:07 2012] Setting source spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17_src.pi.gz [Wed Sep 5 13:49:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17_bgd.pi.gz [Wed Sep 5 13:53:39 2012] Updating aperture counts using extracted products [Wed Sep 5 13:53:39 2012] Error reading totcts from fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17_src.pi.gz [Wed Sep 5 13:53:40 2012] No arf file for this source, not re-computing flux [Wed Sep 5 13:53:42 2012] Source 17 has no response, skipping [Wed Sep 5 13:53:43 2012] xmm0109980301/analysis//spectral/fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete