[Tue Sep  4 21:38:34 2012] Detection parameters:
  Position = (273.9, 270.1) = 9 18 6.09 -12 5 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17428.4 +/- 165.0
  Background counts = 563.3
  Rate = 0.6 +/- 0.005

[Tue Sep  4 21:38:34 2012] Off-axis axis estimate = 2.72'
[Wed Sep  5 00:30:45 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:30:45 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Sep  5 00:30:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.762
[Wed Sep  5 00:30:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.79"
[Wed Sep  5 01:19:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep  5 01:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 01:19:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep  5 01:19:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 01:19:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep  5 01:19:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep  5 01:19:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 01:19:42 2012] Spatial fit model total counts = 50001.300000, observed total counts = 50094.000000
[Wed Sep  5 01:19:42 2012] Offset between fit and detection position for source 1 = 0.351474 pixels
[Wed Sep  5 01:19:42 2012] 50300.900000 total counts/ 25600.000000 bgd. counts: snr = 154.380625
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.351474 pixels
  Position = (273.8, 270.4) = 9 18 6.13 -12 5 42.5
  Extent = 15.6 (15.5-31.2)", rotation angle = 0
  Source counts = 24700.9 +/- 224.3
  Background counts = 25600.0
  Rate = 0.8 +/- 0.007
[Wed Sep  5 01:19:42 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:42 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 01:19:42 2012] Source does appear to be extended
[Wed Sep  5 01:19:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 10:12:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 10:12:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 10:12:18 2012] Initial guess for spatial extent in simple fitting = 15.58"
[Wed Sep  5 10:12:18 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.961
[Wed Sep  5 10:12:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.58"
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep  5 12:28:23 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep  5 12:28:23 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep  5 12:28:24 2012] fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep  5 12:28:24 2012] Fit fullrun_mos2_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep  5 12:28:44 2012] Spatial fit model total counts = 87061.900000, observed total counts = 85116.000000
[Wed Sep  5 12:28:44 2012] Offset between fit and detection position for source 1 = 0.409209 pixels
[Wed Sep  5 12:28:44 2012] 85968.100000 total counts/ 32621.200000 bgd. counts: snr = 295.365129
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.409209 pixels
  Position = (274.0, 270.7) = 9 18 6.06 -12 5 41.0
  Extent = 22.8 (22.6-23.0)", rotation angle = 0
  Source counts = 53346.9 +/- 293.2
  Background counts = 32621.2
  Rate = 2 +/- 0.009
[Wed Sep  5 12:28:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:44 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:44 2012] Source does appear to be extended
[Wed Sep  5 12:28:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:28:44 2012] Source is confused with source 21
[Wed Sep  5 13:45:51 2012] Counts = 53346.900000, rescaling region sizes by 3.000000
[Wed Sep  5 13:45:51 2012] XMMSAS src. selection expression = ellipse(23791.704000, 23505.564600, 4112.100118, 4112.100118, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing source region out to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep  5 13:45:51 2012] Extracting stamp from image fullrun_mos2_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (38, 34) - (510, 507)
[Wed Sep  5 13:45:51 2012] XMMSAS bgd. selection expression = annulus(23791.704000, 23505.564600, 20560.500592, 41121.001183, X, Y) && !ellipse(25132.898000, 23740.898000, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(25071.348000, 24549.348000, 784.660023, 784.660023, 0.000000, X, Y) && !ellipse(25875.040000, 24182.722000, 509.858415, 509.858415, 0.000000, X, Y) && !ellipse(25839.100311, 23796.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.790558, 25623.474762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 25028.923431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.232422, 7359.887321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.954000, 21062.134000, 1418.360041, 1418.360041, 0.000000, X, Y) && !ellipse(26008.002655, 23376.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.783783, 22685.578644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24964.002655, 26306.635040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32945.217194, 16058.549850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23635.119600, 22061.686000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(26494.645630, 25906.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.392000, 23749.777200, 1167.824034, 1167.824034, 0.000000, X, Y) && !ellipse(26214.532000, 24724.598000, 1141.064033, 1141.064033, 0.000000, X, Y)
[Wed Sep  5 13:45:51 2012] Writing fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1.gif
[Wed Sep  5 13:46:01 2012] Mean detx,y = (-1576.91, -114.22) 
[Wed Sep  5 13:46:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:48:32 2012] grppha failed
[Wed Sep  5 13:48:32 2012] Setting source spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 13:48:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 13:53:40 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:42 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Sep  5 13:53:42 2012] Source 1 has no response, skipping
[Wed Sep  5 13:53:43 2012] xmm0109980301/analysis//spectral/fullrun_mos2_xmm0109980301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete