[Tue Sep  4 21:38:17 2012] Detection parameters:
  Position = (300.8, 257.0) = 9 17 58.12 -12 6 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.2 +/- 29.6
  Background counts = 255.5
  Rate = 0.01 +/- 0.001

[Tue Sep  4 21:38:18 2012] Off-axis axis estimate = 3.01'
[Tue Sep  4 23:29:18 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 23:29:18 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Sep  4 23:29:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741
[Tue Sep  4 23:29:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.93"
[Wed Sep  5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5.ximg exists
[Wed Sep  5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5.csv
[Wed Sep  5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Sep  5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5.csv
[Wed Sep  5 00:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Sep  5 00:30:45 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Sep  5 01:19:39 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.920782 pixels away
[Wed Sep  5 01:19:39 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:39 2012] Assessing source extent using major
[Wed Sep  5 01:19:39 2012] Source does appear to be extended
[Wed Sep  5 01:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 01:19:39 2012] Source is confused with source 6
[Wed Sep  5 08:49:34 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 08:49:34 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Wed Sep  5 08:49:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741
[Wed Sep  5 08:49:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.93"
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5.csv
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5.csv
[Wed Sep  5 10:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Sep  5 10:12:17 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Sep  5 12:28:40 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.920782 pixels away
[Wed Sep  5 12:28:40 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:40 2012] Assessing source extent using major
[Wed Sep  5 12:28:40 2012] Source does appear to be extended
[Wed Sep  5 12:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 13:13:00 2012] XMMSAS src. selection expression = ellipse(26121.839691, 22310.489380, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep  5 13:13:00 2012] Writing source region out to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8_src.reg
[Wed Sep  5 13:13:00 2012] Extracting stamp from image fullrun_mos1_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (263, 219) - (338, 294)
[Wed Sep  5 13:13:00 2012] XMMSAS bgd. selection expression = annulus(26121.839691, 22310.489380, 1087.500000, 2175.000000, X, Y) && !ellipse(23778.059020, 23466.415600, 3718.683701, 3718.683701, 0.000000, X, Y) && !ellipse(25007.052000, 21223.296000, 1312.408038, 1312.408038, 0.000000, X, Y) && !ellipse(23674.573000, 22040.490000, 1031.832030, 1031.832030, 0.000000, X, Y) && !ellipse(25748.123077, 22046.064392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.831940, 24224.231842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25297.423000, 25777.256000, 2111.336061, 2111.336061, 0.000000, X, Y) && !ellipse(23164.369060, 20642.606000, 2447.040070, 2447.040070, 0.000000, X, Y) && !ellipse(23343.826000, 19685.152000, 1281.808037, 1281.808037, 0.000000, X, Y) && !ellipse(26609.732000, 23395.616000, 1649.104047, 1649.104047, 0.000000, X, Y) && !ellipse(21955.602000, 21839.886000, 2884.320083, 2884.320083, 0.000000, X, Y) && !ellipse(27008.288000, 23582.148600, 1191.888034, 457.216013, 79.793500, X, Y)
[Wed Sep  5 13:13:00 2012] Writing fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8.gif
[Wed Sep  5 13:21:46 2012] Mean detx,y = (2020.14, -252.17) 
[Wed Sep  5 13:21:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:21:55 2012] grppha failed
[Wed Sep  5 13:21:56 2012] Setting source spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8_src.pi.gz
[Wed Sep  5 13:21:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Sep  5 13:45:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep  5 13:45:48 2012] rmf not generated due to insufficient counts
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8_src.pi.gz
[Wed Sep  5 13:53:39 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Sep  5 13:53:42 2012] xmm0109980301/analysis//spectral/fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete