[Tue Sep  4 21:38:18 2012] Detection parameters:
  Position = (249.4, 252.1) = 9 18 13.37 -12 6 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.7 +/- 28.0
  Background counts = 277.5
  Rate = 0.005 +/- 0.001

[Tue Sep  4 21:38:18 2012] Off-axis axis estimate = 4.89'
[Tue Sep  4 23:29:18 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 23:29:18 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Tue Sep  4 23:29:18 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Tue Sep  4 23:29:18 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.87"
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21.ximg exists
[Wed Sep  5 00:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21.csv
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Sep  5 00:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21.csv
[Wed Sep  5 00:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Sep  5 00:30:45 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Sep  5 01:19:39 2012] Spatial fit model total counts = 3859.030000, observed total counts = 3866.000000
[Wed Sep  5 01:19:39 2012] Offset between fit and detection position for source 31 = 4.848341 pixels
[Wed Sep  5 01:19:39 2012] 3807.683000 total counts/ 3547.420000 bgd. counts: snr = 4.369745
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.848341 pixels
  Position = (249.8, 257.0) = 9 18 13.25 -12 6 40.9
  Extent = 17.7 (17.7-35.5)", rotation angle = 0
  Source counts = 260.3 +/- 61.7
  Background counts = 3547.4
  Rate = 0.008 +/- 0.002
[Wed Sep  5 01:19:39 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:39 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 01:19:39 2012] Source does appear to be extended
[Wed Sep  5 01:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 01:19:39 2012] Source is confused with source 16
[Wed Sep  5 08:49:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 08:49:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 08:49:34 2012] Initial guess for spatial extent in simple fitting = 17.75"
[Wed Sep  5 08:49:34 2012] source mask rpix=4.1, npix_max = 83, mask sum = 90, frac = 1.073
[Wed Sep  5 08:49:34 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 17.75"
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19.csv
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19.csv
[Wed Sep  5 10:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 10:12:18 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Sep  5 10:12:18 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Sep  5 10:12:18 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Sep  5 12:28:40 2012] Warning, spatial fit 19 centroid is now closest to src. 33
[Wed Sep  5 12:28:40 2012] Spatial fit model total counts = 5540.090000, observed total counts = 5470.000000
[Wed Sep  5 12:28:40 2012] Offset between fit and detection position for source 31 = 6.223054 pixels
[Wed Sep  5 12:28:40 2012] Warning, changing simple spatial fit ID from 19 to 22
[Wed Sep  5 12:28:40 2012] 5625.820000 total counts/ 4631.140000 bgd. counts: snr = 14.616367
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 6.223054 pixels
  Position = (252.9, 251.6) = 9 18 12.32 -12 7 4.3
  Extent = 36.1 (36.0-36.1)", rotation angle = 0
  Source counts = 994.7 +/- 75.0
  Background counts = 4631.1
  Rate = 0.03 +/- 0.002
[Wed Sep  5 12:28:40 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:40 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:40 2012] Source does appear to be extended
[Wed Sep  5 12:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 13:13:00 2012] XMMSAS src. selection expression = ellipse(21955.602000, 21839.886000, 2163.240062, 2163.240062, 0.000000, X, Y)
[Wed Sep  5 13:13:00 2012] Writing source region out to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31_src.reg
[Wed Sep  5 13:13:00 2012] Extracting stamp from image fullrun_mos1_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (129, 127) - (377, 376)
[Wed Sep  5 13:13:00 2012] XMMSAS bgd. selection expression = annulus(21955.602000, 21839.886000, 3605.400104, 7210.800207, X, Y) && !ellipse(23778.059020, 23466.415600, 3718.683701, 3718.683701, 0.000000, X, Y) && !ellipse(25007.052000, 21223.296000, 1312.408038, 1312.408038, 0.000000, X, Y) && !ellipse(23674.573000, 22040.490000, 1031.832030, 1031.832030, 0.000000, X, Y) && !ellipse(26121.839691, 22310.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.884796, 21719.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25748.123077, 22046.064392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.831940, 24224.231842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25297.423000, 25777.256000, 2111.336061, 2111.336061, 0.000000, X, Y) && !ellipse(23164.369060, 20642.606000, 2447.040070, 2447.040070, 0.000000, X, Y) && !ellipse(23343.826000, 19685.152000, 1281.808037, 1281.808037, 0.000000, X, Y) && !ellipse(27407.959778, 17558.253769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22973.585602, 20836.829971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18981.930923, 24749.099274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.417938, 25535.672943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.732000, 23395.616000, 1649.104047, 1649.104047, 0.000000, X, Y) && !ellipse(25918.135223, 26227.249664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.288000, 23582.148600, 1191.888034, 457.216013, 79.793500, X, Y) && !ellipse(20339.502000, 21604.704000, 2839.552082, 2839.552082, 0.000000, X, Y)
[Wed Sep  5 13:13:00 2012] Writing fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31.gif
[Wed Sep  5 13:35:22 2012] Mean detx,y = (745.92, 2930.36) 
[Wed Sep  5 13:35:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:36:36 2012] grppha failed
[Wed Sep  5 13:36:36 2012] Setting source spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31_src.pi.gz
[Wed Sep  5 13:36:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31_src.pi.gz
[Wed Sep  5 13:53:39 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:41 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Wed Sep  5 13:53:41 2012] Source 31 has no response, skipping
[Wed Sep  5 13:53:42 2012] xmm0109980301/analysis//spectral/fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete