[Tue Sep 4 21:38:17 2012] Detection parameters: Position = (292.9, 299.9) = 9 18 0.47 -12 3 33.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 269.2 +/- 32.1 Background counts = 275.1 Rate = 0.009 +/- 0.001 [Tue Sep 4 21:38:18 2012] Off-axis axis estimate = 0.42' [Tue Sep 4 23:29:18 2012] Using EEF radius (= 6.64 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 23:29:18 2012] Initial guess for spatial extent in simple fitting = 6.64" [Tue Sep 4 23:29:18 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975 [Tue Sep 4 23:29:18 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.64" [Wed Sep 5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10.ximg exists [Wed Sep 5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10.csv [Wed Sep 5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10_1.ximg exists [Wed Sep 5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10.csv [Wed Sep 5 00:30:44 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed Sep 5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed Sep 5 00:30:45 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Wed Sep 5 01:19:39 2012] Spatial fit model total counts = 4086.060000, observed total counts = 4077.000000 [Wed Sep 5 01:19:39 2012] Offset between fit and detection position for source 10 = 5.018834 pixels [Wed Sep 5 01:19:39 2012] 3930.752000 total counts/ 3685.250000 bgd. counts: snr = 4.044097 Spatial fit parameters: Offset between fit and detection position for source 10 = 5.018834 pixels Position = (293.9, 304.8) = 9 18 0.15 -12 3 12.8 Extent = 13.3 (13.1-26.5)", rotation angle = 0 Source counts = 245.5 +/- 62.7 Background counts = 3685.2 Rate = 0.008 +/- 0.002 [Wed Sep 5 01:19:39 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 01:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 01:19:39 2012] Assessing source extent using major axis lower bound [Wed Sep 5 01:19:39 2012] Source does appear to be extended [Wed Sep 5 01:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 01:19:39 2012] Source is confused with source 28 [Wed Sep 5 08:49:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 5 08:49:34 2012] Initial guess for spatial extent in simple fitting = 13.27" [Wed Sep 5 08:49:34 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.971 [Wed Sep 5 08:49:34 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.27" [Wed Sep 5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src10.ximg exists [Wed Sep 5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src10_1.ximg exists [Wed Sep 5 10:12:17 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src10 appears to have run properly [Wed Sep 5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Wed Sep 5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Wed Sep 5 10:12:17 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Wed Sep 5 12:28:40 2012] Spatial fit model total counts = 4538.320000, observed total counts = 4536.000000 [Wed Sep 5 12:28:40 2012] Offset between fit and detection position for source 10 = 8.369649 pixels [Wed Sep 5 12:28:40 2012] 4474.362000 total counts/ 3479.210000 bgd. counts: snr = 16.871321 Spatial fit parameters: Offset between fit and detection position for source 10 = 8.369649 pixels Position = (291.3, 296.8) = 9 18 0.93 -12 3 47.4 Extent = 26.4 (26.1-26.5)", rotation angle = 0 Source counts = 995.2 +/- 66.9 Background counts = 3479.2 Rate = 0.03 +/- 0.002 [Wed Sep 5 12:28:40 2012] Source 10 is offset by -2.405606 and 1.625758 pixels which is larger than 2 X fitted extent = 1.405464 x 6.849931, not incorporating fit results [Wed Sep 5 12:28:40 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 12:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 12:28:40 2012] Assessing source extent using major axis lower bound [Wed Sep 5 12:28:40 2012] Source does appear to be extended [Wed Sep 5 12:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 13:13:00 2012] XMMSAS src. selection expression = ellipse(25297.423000, 25777.256000, 1583.502046, 1583.502046, 0.000000, X, Y) [Wed Sep 5 13:13:00 2012] Writing source region out to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10_src.reg [Wed Sep 5 13:13:00 2012] Extracting stamp from image fullrun_mos1_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (200, 206) - (382, 388) [Wed Sep 5 13:13:00 2012] XMMSAS bgd. selection expression = annulus(25297.423000, 25777.256000, 2639.170076, 5278.340152, X, Y) && !ellipse(23778.059020, 23466.415600, 3718.683701, 3718.683701, 0.000000, X, Y) && !ellipse(25007.052000, 21223.296000, 1312.408038, 1312.408038, 0.000000, X, Y) && !ellipse(23674.573000, 22040.490000, 1031.832030, 1031.832030, 0.000000, X, Y) && !ellipse(26121.839691, 22310.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.884796, 21719.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25748.123077, 22046.064392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.831940, 24224.231842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23164.369060, 20642.606000, 2447.040070, 2447.040070, 0.000000, X, Y) && !ellipse(23343.826000, 19685.152000, 1281.808037, 1281.808037, 0.000000, X, Y) && !ellipse(22973.585602, 20836.829971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.417938, 25535.672943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.732000, 23395.616000, 1649.104047, 1649.104047, 0.000000, X, Y) && !ellipse(21955.602000, 21839.886000, 2884.320083, 2884.320083, 0.000000, X, Y) && !ellipse(25918.135223, 26227.249664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.288000, 23582.148600, 1191.888034, 457.216013, 79.793500, X, Y) && !ellipse(20339.502000, 21604.704000, 2839.552082, 2839.552082, 0.000000, X, Y) [Wed Sep 5 13:13:00 2012] Writing fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10.gif [Wed Sep 5 13:23:02 2012] Mean detx,y = (-1229.44, -436.11) [Wed Sep 5 13:23:03 2012] Setting backscal keywords in source and bgd. spectrum [Wed Sep 5 13:23:34 2012] grppha failed [Wed Sep 5 13:23:34 2012] Setting source spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10_src.pi.gz [Wed Sep 5 13:23:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed Sep 5 13:53:39 2012] Updating aperture counts using extracted products [Wed Sep 5 13:53:39 2012] Error reading totcts from fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10_src.pi.gz [Wed Sep 5 13:53:39 2012] No arf file for this source, not re-computing flux [Wed Sep 5 13:53:41 2012] Flag b found in src. 10 procflags, skipping spectral fitting [Wed Sep 5 13:53:41 2012] Flag c found in src. 10 procflags, skipping spectral fitting [Wed Sep 5 13:53:41 2012] Source 10 has no response, skipping [Wed Sep 5 13:53:42 2012] xmm0109980301/analysis//spectral/fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete