[Tue Sep  4 21:38:17 2012] Detection parameters:
  Position = (274.0, 270.1) = 9 18 6.08 -12 5 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17769.6 +/- 167.6
  Background counts = 498.8
  Rate = 0.6 +/- 0.005

[Tue Sep  4 21:38:18 2012] Off-axis axis estimate = 2.72'
[Tue Sep  4 23:29:18 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 23:29:18 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Tue Sep  4 23:29:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Tue Sep  4 23:29:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.79"
[Wed Sep  5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep  5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 00:30:44 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep  5 00:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 00:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep  5 00:30:45 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep  5 00:30:45 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 01:19:39 2012] Spatial fit model total counts = 49453.100000, observed total counts = 49522.000000
[Wed Sep  5 01:19:39 2012] Offset between fit and detection position for source 1 = 0.247410 pixels
[Wed Sep  5 01:19:39 2012] 49778.800000 total counts/ 25600.000000 bgd. counts: snr = 151.117500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.247410 pixels
  Position = (273.9, 270.3) = 9 18 6.11 -12 5 42.9
  Extent = 15.5 (15.3-15.6)", rotation angle = 0
  Source counts = 24178.8 +/- 223.1
  Background counts = 25600.0
  Rate = 0.8 +/- 0.007
[Wed Sep  5 01:19:39 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 01:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 01:19:39 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 01:19:39 2012] Source does appear to be extended
[Wed Sep  5 01:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 08:49:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 08:49:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 08:49:34 2012] Initial guess for spatial extent in simple fitting = 15.49"
[Wed Sep  5 08:49:34 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.970
[Wed Sep  5 08:49:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.49"
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep  5 10:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 10:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep  5 10:12:17 2012] fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep  5 10:12:17 2012] Fit fullrun_mos1_xmm0109980301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep  5 12:28:40 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Wed Sep  5 12:28:40 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:28:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:28:40 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:28:40 2012] Source does appear to be extended
[Wed Sep  5 12:28:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 13:13:00 2012] Counts = 24178.800000, rescaling region sizes by 3.000000
[Wed Sep  5 13:13:00 2012] XMMSAS src. selection expression = ellipse(23778.059020, 23466.415600, 2789.012775, 2789.012775, 0.000000, X, Y)
[Wed Sep  5 13:13:00 2012] Writing source region out to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep  5 13:13:00 2012] Extracting stamp from image fullrun_mos1_xmm0109980301_pi300-10000_cl_sm2.00.img.gz, (114, 110) - (434, 431)
[Wed Sep  5 13:13:00 2012] XMMSAS bgd. selection expression = annulus(23778.059020, 23466.415600, 13945.063877, 27890.127754, X, Y) && !ellipse(25007.052000, 21223.296000, 1312.408038, 1312.408038, 0.000000, X, Y) && !ellipse(23674.573000, 22040.490000, 1031.832030, 1031.832030, 0.000000, X, Y) && !ellipse(26121.839691, 22310.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.884796, 21719.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25748.123077, 22046.064392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.831940, 24224.231842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32899.661200, 16044.128000, 569.654416, 569.654416, 0.000000, X, Y) && !ellipse(25297.423000, 25777.256000, 2111.336061, 2111.336061, 0.000000, X, Y) && !ellipse(23164.369060, 20642.606000, 2447.040070, 2447.040070, 0.000000, X, Y) && !ellipse(23343.826000, 19685.152000, 1281.808037, 1281.808037, 0.000000, X, Y) && !ellipse(27407.959778, 17558.253769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22973.585602, 20836.829971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18981.930923, 24749.099274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.417938, 25535.672943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.732000, 23395.616000, 1649.104047, 1649.104047, 0.000000, X, Y) && !ellipse(21955.602000, 21839.886000, 2884.320083, 2884.320083, 0.000000, X, Y) && !ellipse(25918.135223, 26227.249664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.288000, 23582.148600, 1191.888034, 457.216013, 79.793500, X, Y) && !ellipse(20339.502000, 21604.704000, 2839.552082, 2839.552082, 0.000000, X, Y) && !ellipse(29652.188000, 37919.202800, 1872.784054, 1872.784054, 0.000000, X, Y)
[Wed Sep  5 13:13:00 2012] Writing fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1.gif
[Wed Sep  5 13:13:12 2012] Mean detx,y = (122.34, 1406.93) 
[Wed Sep  5 13:13:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 13:21:13 2012] grppha failed
[Wed Sep  5 13:21:13 2012] Setting source spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 13:21:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep  5 13:53:39 2012] Updating aperture counts using extracted products
[Wed Sep  5 13:53:39 2012] Error reading totcts from fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 13:53:39 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 13:53:41 2012] Source 1 has no response, skipping
[Wed Sep  5 13:53:42 2012] xmm0109980301/analysis//spectral/fullrun_mos1_xmm0109980301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete