[Fri Sep 23 11:49:15 2011] Detection parameters:
  Position = (298.7, 315.1) = 1 52 54.46 36 9 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.4 +/- 36.5
  Background counts = 324.6
  Rate = 0.02 +/- 0.002

[Fri Sep 23 11:49:16 2011] Off-axis axis estimate = 1.21'
[Fri Sep 23 11:51:24 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:51:24 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Sep 23 11:51:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Fri Sep 23 11:51:24 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.03"
[Fri Sep 23 13:03:34 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Sep 23 13:03:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7.csv
[Fri Sep 23 13:03:34 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Sep 23 13:03:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7.csv
[Fri Sep 23 13:03:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 23 13:03:35 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep 23 14:16:49 2011] Source 7 is offset by 3.948561 and 5.568490 pixels which is larger than
2 X fitted extent = 5.315606 x 5.315606, not incorporating fit results
[Fri Sep 23 14:16:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:49 2011] Assessing source extent using major
[Fri Sep 23 14:16:49 2011] Source does appear to be extended
[Fri Sep 23 14:16:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:17:03 2011] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 14:17:03 2011] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Sep 23 14:17:03 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Fri Sep 23 14:17:03 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.03"
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Sep 23 16:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Sep 23 16:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 16:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep 23 16:13:59 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep 23 17:34:14 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 18.761503 pixels away
[Fri Sep 23 17:34:14 2011] Source 7 is offset by 3.946997 and 5.568490 pixels which is larger than
2 X fitted extent = 5.318635 x 5.318635, not incorporating fit results
[Fri Sep 23 17:34:14 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 20.626695 pixels away
[Fri Sep 23 17:34:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:14 2011] Assessing source extent using major
[Fri Sep 23 17:34:14 2011] Source does appear to be extended
[Fri Sep 23 17:34:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 17:34:26 2011] XMMSAS src. selection expression = ellipse(25939.988770, 27365.338593, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing source region out to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7_src.reg
[Fri Sep 23 17:34:26 2011] Extracting stamp from image fullrun_pn_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (261, 278) - (336, 353)
[Fri Sep 23 17:34:26 2011] XMMSAS bgd. selection expression = annulus(25939.988770, 27365.338593, 1087.500000, 2175.000000, X, Y) && !ellipse(27989.649800, 26797.662400, 3337.032096, 3337.032096, 0.000000, X, Y) && !ellipse(28213.758000, 28462.404000, 1268.192036, 1268.192036, 0.000000, X, Y) && !ellipse(26584.536957, 29847.021027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26575.244354, 29003.868683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.271515, 29618.590271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27244.545380, 29432.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.570000, 29847.980000, 1313.920038, 1313.920038, 0.000000, X, Y) && !ellipse(24885.208000, 25331.476000, 1068.480031, 1068.480031, 0.000000, X, Y) && !ellipse(27053.699219, 24621.429535, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7.gif
[Fri Sep 23 17:47:46 2011] Mean detx,y = (-1504.85, 115.70) 
[Fri Sep 23 17:47:48 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 17:47:59 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 17:47:59 2011] Setting source spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Sep 23 17:47:59 2011] Setting bgd. spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Sep 24 00:00:22 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 00:00:22 2011] rmf not generated due to insufficient counts
[Sat Sep 24 02:26:36 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:36 2011] Error reading totcts from fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Sep 24 02:26:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:36 2011] Using photon index=1.80, rate=0.0238, arf fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src7.arf
[Sat Sep 24 02:26:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:36 2011] Updating source flux to 7e-14
[Sat Sep 24 02:29:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting