[Fri Sep 23 11:49:15 2011] Detection parameters:
  Position = (326.2, 325.5) = 1 52 44.58 36 10 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.8 +/- 34.8
  Background counts = 359.6
  Rate = 0.03 +/- 0.002

[Fri Sep 23 11:49:16 2011] Off-axis axis estimate = 2.81'
[Fri Sep 23 11:51:24 2011] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:51:24 2011] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Sep 23 11:51:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.992
[Fri Sep 23 11:51:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.83"
[Fri Sep 23 13:03:34 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Sep 23 13:03:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3.csv
[Fri Sep 23 13:03:34 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Sep 23 13:03:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3.csv
[Fri Sep 23 13:03:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 13:03:35 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 23 14:16:49 2011] Warning, spatial fit 3 centroid is now closest to src. 6
[Fri Sep 23 14:16:49 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.825209 pixels away
[Fri Sep 23 14:16:49 2011] Spatial fit model total counts = 5028.860000, observed total counts = 5024.000000
[Fri Sep 23 14:16:49 2011] Offset between fit and detection position for source 3 = 2.613628 pixels
[Fri Sep 23 14:16:49 2011] Warning, changing simple spatial fit ID from 3 to 19
[Fri Sep 23 14:16:49 2011] 4854.911000 total counts/ 4696.960000 bgd. counts: snr = 2.304698
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.613628 pixels
  Position = (324.9, 327.7) = 1 52 45.07 36 10 32.6
  Extent = 15.9 (15.8-31.7)", rotation angle = 0
  Source counts = 158.0 +/- 69.7
  Background counts = 4697.0
  Rate = 0.008 +/- 0.003
[Fri Sep 23 14:16:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 14:16:49 2011] Source does appear to be extended
[Fri Sep 23 14:16:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:16:49 2011] Source is confused with source 6
[Fri Sep 23 14:17:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 14:17:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 14:17:03 2011] Initial guess for spatial extent in simple fitting = 15.85"
[Fri Sep 23 14:17:03 2011] source mask rpix=3.6, npix_max = 68, mask sum = 62, frac = 0.902
[Fri Sep 23 14:17:03 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.85"
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Sep 23 16:13:59 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 23 16:13:59 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 23 17:34:14 2011] Warning, spatial fit 3 centroid is now closest to src. 7
[Fri Sep 23 17:34:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:14 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 17:34:14 2011] Source does appear to be extended
[Fri Sep 23 17:34:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 17:34:26 2011] XMMSAS src. selection expression = ellipse(28213.758000, 28462.404000, 951.144027, 951.144027, 0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing source region out to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3_src.reg
[Fri Sep 23 17:34:26 2011] Extracting stamp from image fullrun_pn_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (270, 273) - (380, 382)
[Fri Sep 23 17:34:26 2011] XMMSAS bgd. selection expression = annulus(28213.758000, 28462.404000, 1585.240046, 3170.480091, X, Y) && !ellipse(27989.649800, 26797.662400, 3337.032096, 3337.032096, 0.000000, X, Y) && !ellipse(29361.926000, 28273.600000, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(28940.242000, 27854.262000, 622.085618, 622.085618, 0.000000, X, Y) && !ellipse(25939.988770, 27365.338593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30111.532000, 26271.504200, 1284.664037, 1284.664037, 0.000000, X, Y) && !ellipse(29886.184000, 26305.850000, 1312.704038, 1308.120038, -0.000000, X, Y) && !ellipse(30241.338000, 25974.062000, 620.498418, 620.498418, 0.000000, X, Y) && !ellipse(29311.631714, 25537.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.080078, 30919.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.536957, 29847.021027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26575.244354, 29003.868683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.271515, 29618.590271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27244.545380, 29432.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.570000, 29847.980000, 1313.920038, 1313.920038, 0.000000, X, Y) && !ellipse(30062.420000, 29107.674000, 1272.256037, 1272.256037, 0.000000, X, Y) && !ellipse(24885.208000, 25331.476000, 1068.480031, 1068.480031, 0.000000, X, Y) && !ellipse(27053.699219, 24621.429535, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3.gif
[Fri Sep 23 17:42:55 2011] Mean detx,y = (24.55, -1713.69) 
[Fri Sep 23 17:42:56 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 17:43:12 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 17:43:12 2011] Setting source spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Sep 23 17:43:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Sep 24 02:26:35 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:35 2011] Error reading totcts from fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Sep 24 02:26:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:36 2011] Using photon index=1.80, rate=0.0079, arf fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src3.arf
[Sat Sep 24 02:26:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:36 2011] Updating source flux to 1.9e-14
[Sat Sep 24 02:29:04 2011] Flag c found in src. 3 procflags, skipping spectral fitting