[Fri Sep 23 11:49:15 2011] Detection parameters:
  Position = (342.5, 301.0) = 1 52 38.73 36 8 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 332.4 +/- 34.7
  Background counts = 332.1
  Rate = 0.02 +/- 0.002

[Fri Sep 23 11:49:16 2011] Off-axis axis estimate = 3.20'
[Fri Sep 23 11:51:24 2011] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:51:24 2011] Initial guess for spatial extent in simple fitting = 8.03"
[Fri Sep 23 11:51:24 2011] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.909
[Fri Sep 23 11:51:24 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 8.03"
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Sep 23 13:03:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10.csv
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Sep 23 13:03:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10.csv
[Fri Sep 23 13:03:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 13:03:35 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:03:35 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 23 14:16:49 2011] Spatial fit model total counts = 3572.170000, observed total counts = 3573.000000
[Fri Sep 23 14:16:49 2011] Offset between fit and detection position for source 10 = 2.509301 pixels
[Fri Sep 23 14:16:49 2011] Warning, changing simple spatial fit ID from 10 to 8
[Fri Sep 23 14:16:49 2011] 3338.140000 total counts/ 2046.300000 bgd. counts: snr = 28.557756
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.509301 pixels
  Position = (344.1, 302.9) = 1 52 38.17 36 8 44.7
  Extent = 16.4 (16.0-32.8)" x 16.4 (16.3-16.4)", rotation angle = -0
  Source counts = 1291.8 +/- 57.8
  Background counts = 2046.3
  Rate = 0.06 +/- 0.003
[Fri Sep 23 14:16:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 14:16:49 2011] Source does appear to be extended
[Fri Sep 23 14:16:49 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri Sep 23 14:16:49 2011] Source is confused with source 8
[Fri Sep 23 14:17:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 14:17:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 14:17:03 2011] Initial guess for spatial extent in simple fitting = 16.38"
[Fri Sep 23 14:17:03 2011] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.879
[Fri Sep 23 14:17:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 16.38"
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Sep 23 16:13:59 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 16:13:59 2011] fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 16:13:59 2011] Fit fullrun_pn_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 17:34:14 2011] Warning, spatial fit 10 centroid is now closest to src. 31
[Fri Sep 23 17:34:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:14 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 17:34:14 2011] Source does appear to be extended
[Fri Sep 23 17:34:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Fri Sep 23 17:34:26 2011] Counts = 1291.840000, rescaling region sizes by 2.000000
[Fri Sep 23 17:34:26 2011] XMMSAS src. selection expression = ellipse(29886.184000, 26305.850000, 1969.056057, 1962.180056, -0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing source region out to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10_src.reg
[Fri Sep 23 17:34:26 2011] Extracting stamp from image fullrun_pn_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (231, 190) - (457, 416)
[Fri Sep 23 17:34:26 2011] XMMSAS bgd. selection expression = annulus(29886.184000, 26305.850000, 6563.520189, 13127.040378, X, Y) && !ellipse(27989.649800, 26797.662400, 3337.032096, 3337.032096, 0.000000, X, Y) && !ellipse(22812.231000, 30619.185600, 477.684814, 477.684814, 0.000000, X, Y) && !ellipse(28213.758000, 28462.404000, 1268.192036, 1268.192036, 0.000000, X, Y) && !ellipse(29361.926000, 28273.600000, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(42234.729279, 27858.677551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28940.242000, 27854.262000, 622.085618, 622.085618, 0.000000, X, Y) && !ellipse(25939.988770, 27365.338593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30111.532000, 26271.504200, 1284.664037, 1284.664037, 0.000000, X, Y) && !ellipse(22936.689540, 26670.725600, 391.698411, 391.698411, 0.000000, X, Y) && !ellipse(30241.338000, 25974.062000, 620.498418, 620.498418, 0.000000, X, Y) && !ellipse(29311.631714, 25537.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.086800, 24720.914800, 565.304816, 565.304816, 0.000000, X, Y) && !ellipse(33781.819580, 23877.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39301.314850, 22735.939240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31406.335600, 22077.664600, 1217.056035, 711.180020, 120.793913, X, Y) && !ellipse(29640.080078, 30919.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.264679, 31713.262360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.536957, 29847.021027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26575.244354, 29003.868683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26052.704968, 19613.336200, 375.869611, 375.869611, 0.000000, X, Y) && !ellipse(27687.271515, 29618.590271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27244.545380, 29432.016052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28779.570000, 29847.980000, 1313.920038, 1313.920038, 0.000000, X, Y) && !ellipse(30062.420000, 29107.674000, 1272.256037, 1272.256037, 0.000000, X, Y) && !ellipse(24885.208000, 25331.476000, 1068.480031, 1068.480031, 0.000000, X, Y) && !ellipse(27053.699219, 24621.429535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.561066, 20287.321213, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 17:34:26 2011] Writing fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10.gif
[Fri Sep 23 17:48:57 2011] Mean detx,y = (1712.32, -191.38) 
[Fri Sep 23 17:49:00 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 17:52:46 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 17:52:46 2011] Setting source spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Sep 23 17:52:46 2011] Setting bgd. spectrum file to fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Sep 24 02:26:36 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:36 2011] Error reading totcts from fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Sep 24 02:26:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:36 2011] Using photon index=1.80, rate=0.0646, arf fullrun_pn_xmm0109980101_pi300-10000_pass1_cl_src10.arf
[Sat Sep 24 02:26:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:36 2011] Updating source flux to 1.5e-13
[Sat Sep 24 02:29:04 2011] Flag c found in src. 10 procflags, skipping spectral fitting