[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (248.1, 351.4) = 1 53 12.65 36 12 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.6 +/- 15.3
  Background counts = 46.5
  Rate = 0.01 +/- 0.001

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 5.30'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 9.08"
[Fri Sep 23 13:03:36 2011] source mask rpix=2.1, npix_max = 26, mask sum = 17, frac = 0.635
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 9.08"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Sep 23 14:16:53 2011] Source 4 is offset by -8.250591 and 5.583260 pixels which is larger than
2 X fitted extent = 2.827908 x 2.827908, not incorporating fit results
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:13:59 2011] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 9.08"
[Fri Sep 23 16:13:59 2011] source mask rpix=2.1, npix_max = 26, mask sum = 17, frac = 0.635
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 9.08"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep 23 17:34:17 2011] Source 4 is offset by -8.250591 and 5.594019 pixels which is larger than
2 X fitted extent = 2.905338 x 2.905338, not incorporating fit results
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:49:14 2011] XMMSAS src. selection expression = ellipse(21535.880600, 30522.959625, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 00:49:14 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4_src.reg
[Sat Sep 24 00:49:14 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (211, 314) - (286, 389)
[Sat Sep 24 00:49:14 2011] XMMSAS bgd. selection expression = annulus(21535.880600, 30522.959625, 1087.500000, 2175.000000, X, Y) && !ellipse(22799.220600, 30624.858200, 306.859209, 306.859209, 0.000000, X, Y) && !ellipse(25579.600000, 28558.852000, 2192.128063, 499.243214, 118.416000, X, Y) && !ellipse(24797.764000, 27376.730200, 1115.472032, 1115.472032, 0.000000, X, Y)
[Sat Sep 24 00:49:14 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4.gif
[Sat Sep 24 00:54:05 2011] Mean detx,y = (1119.03, -7313.09) 
[Sat Sep 24 00:54:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:54:23 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:54:23 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Sep 24 00:54:23 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Sep 24 01:30:12 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 01:30:12 2011] rmf not generated due to insufficient counts
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Sep 24 02:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:37 2011] Using photon index=1.80, rate=0.0098, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src4.arf
[Sat Sep 24 02:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:37 2011] Updating source flux to 1.7e-13
[Sat Sep 24 02:26:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting