[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (331.2, 292.2) = 1 52 42.80 36 7 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.0 +/- 25.0
  Background counts = 135.5
  Rate = 0.008 +/- 0.001

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 2.42'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.64"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep 23 14:16:53 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 10.048378 pixels away
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:13:59 2011] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Fri Sep 23 16:13:59 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.64"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 17:34:17 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 17.739420 pixels away
[Fri Sep 23 17:34:17 2011] Warning, spatial fit 10 centroid is now closest to src. 33
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 17:34:17 2011] Source is confused with source 33
[Sat Sep 24 00:49:15 2011] XMMSAS src. selection expression = ellipse(28765.545288, 25373.416138, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35_src.reg
[Sat Sep 24 00:49:15 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (294, 255) - (369, 330)
[Sat Sep 24 00:49:15 2011] XMMSAS bgd. selection expression = annulus(28765.545288, 25373.416138, 1087.500000, 2175.000000, X, Y) && !ellipse(27972.712800, 26758.366400, 1165.254820, 1165.254820, 0.000000, X, Y) && !ellipse(29984.154000, 28176.354000, 826.296024, 826.296024, 0.000000, X, Y) && !ellipse(26376.300600, 27774.010000, 1188.608034, 1188.608034, 0.000000, X, Y) && !ellipse(29478.938385, 28270.684998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26114.772000, 28236.622000, 1158.944033, 1158.944033, 0.000000, X, Y) && !ellipse(26960.167847, 25447.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29573.247681, 27437.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.619171, 25626.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25579.600000, 28558.852000, 2192.128063, 499.243214, 118.416000, X, Y) && !ellipse(29232.410000, 24832.094000, 1221.984035, 1221.984035, 0.000000, X, Y) && !ellipse(30276.724243, 26402.537354, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35.gif
[Sat Sep 24 00:54:45 2011] Mean detx,y = (-762.91, 1396.52) 
[Sat Sep 24 00:54:46 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:54:53 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:54:53 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Sep 24 00:54:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Sep 24 01:37:14 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 01:37:14 2011] rmf not generated due to insufficient counts
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Sep 24 02:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:37 2011] Using photon index=1.80, rate=0.0079, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src35.arf
[Sat Sep 24 02:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:37 2011] Updating source flux to 7.6e-14
[Sat Sep 24 02:26:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting