[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (264.3, 307.1) = 1 53 6.81 36 9 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 18.1
  Background counts = 73.6
  Rate = 0.007 +/- 0.0009

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 2.55'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 7.70"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Sep 23 14:16:53 2011] Source 29 is offset by 7.398700 and 6.172046 pixels which is larger than
2 X fitted extent = 0.885591 x 0.885591, not incorporating fit results
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:13:59 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Sep 23 16:13:59 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 7.70"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Sep 23 17:34:17 2011] Source 29 is offset by 7.398700 and 6.172046 pixels which is larger than
2 X fitted extent = 0.885591 x 0.885591, not incorporating fit results
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:49:15 2011] XMMSAS src. selection expression = ellipse(22946.814941, 26668.096039, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29_src.reg
[Sat Sep 24 00:49:15 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (227, 270) - (302, 345)
[Sat Sep 24 00:49:15 2011] XMMSAS bgd. selection expression = annulus(22946.814941, 26668.096039, 1087.500000, 2175.000000, X, Y) && !ellipse(26114.772000, 28236.622000, 1158.944033, 1158.944033, 0.000000, X, Y) && !ellipse(25579.600000, 28558.852000, 2192.128063, 499.243214, 118.416000, X, Y) && !ellipse(24797.764000, 27376.730200, 1115.472032, 1115.472032, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29.gif
[Sat Sep 24 00:55:09 2011] Mean detx,y = (-1857.82, -4405.21) 
[Sat Sep 24 00:55:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:55:16 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:55:16 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Sep 24 00:55:16 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Sep 24 01:37:18 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 01:37:18 2011] rmf not generated due to insufficient counts
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Sep 24 02:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:37 2011] Using photon index=1.80, rate=0.00695, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src29.arf
[Sat Sep 24 02:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:37 2011] Updating source flux to 8.4e-14
[Sat Sep 24 02:26:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting