[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (293.1, 324.0) = 1 52 56.47 36 10 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.0 +/- 20.3
  Background counts = 124.1
  Rate = 0.005 +/- 0.0009

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 1.90'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.38"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.38"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Sep 23 14:16:53 2011] Source 23 is offset by -6.637380 and 5.540099 pixels which is larger than
2 X fitted extent = 3.953720 x 3.953720, not incorporating fit results
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:16:53 2011] Source is confused with source 21
[Fri Sep 23 16:13:59 2011] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 7.38"
[Fri Sep 23 16:13:59 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 7.38"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Sep 23 17:34:17 2011] Spatial fit model total counts = 4113.460000, observed total counts = 3561.000000
[Fri Sep 23 17:34:17 2011] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep 23 17:34:17 2011] Source 23 is offset by -6.436782 and 3.917271 pixels which is larger than
2 X fitted extent = 0.847835 x 0.847835, not incorporating fit results
[Fri Sep 23 17:34:17 2011] Spatial fit model total counts = 2154.000000, observed total counts = 2153.000000
[Fri Sep 23 17:34:17 2011] Offset between fit and detection position for source 23 = 5.006845 pixels
[Fri Sep 23 17:34:17 2011] Warning, changing simple spatial fit ID from 19 to 22
[Fri Sep 23 17:34:17 2011] 2151.323700 total counts/ 2064.400000 bgd. counts: snr = 1.913116
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.006845 pixels
  Position = (294.6, 328.8) = 1 52 55.95 36 10 37.5
  Extent = 27.4 (26.4-27.9)" x 6.2 (3.5-11.8)", rotation angle = 118 (94-140) degrees
  Source counts = 86.9 +/- 46.4
  Background counts = 2064.4
  Rate = 0.004 +/- 0.002
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.25
[Fri Sep 23 17:34:17 2011] Source is asymmetric
[Sat Sep 24 00:49:15 2011] XMMSAS src. selection expression = ellipse(25579.600000, 28558.852000, 1644.096047, 374.432411, 118.416000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23_src.reg
[Sat Sep 24 00:49:15 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (200, 234) - (389, 423)
[Sat Sep 24 00:49:15 2011] XMMSAS bgd. selection expression = annulus(25579.600000, 28558.852000, 2740.160079, 5480.320158, X, Y) && !ellipse(27972.712800, 26758.366400, 1165.254820, 1165.254820, 0.000000, X, Y) && !ellipse(29984.154000, 28176.354000, 826.296024, 826.296024, 0.000000, X, Y) && !ellipse(29629.343580, 30847.238200, 366.344811, 366.344811, 0.000000, X, Y) && !ellipse(22799.220600, 30624.858200, 306.859209, 306.859209, 0.000000, X, Y) && !ellipse(26376.300600, 27774.010000, 1188.608034, 1188.608034, 0.000000, X, Y) && !ellipse(21535.880600, 30522.959625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.938385, 28270.684998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26114.772000, 28236.622000, 1158.944033, 1158.944033, 0.000000, X, Y) && !ellipse(28765.545288, 25373.416138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.167847, 25447.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22946.814941, 26668.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29573.247681, 27437.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.135956, 28649.642639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.619171, 25626.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.672394, 29178.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.410000, 24832.094000, 1221.984035, 1221.984035, 0.000000, X, Y) && !ellipse(24797.764000, 27376.730200, 1115.472032, 1115.472032, 0.000000, X, Y) && !ellipse(30276.724243, 26402.537354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28252.330780, 28924.055847, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23.gif
[Sat Sep 24 00:56:07 2011] Mean detx,y = (750.90, -2512.24) 
[Sat Sep 24 00:56:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:56:45 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:56:45 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Sep 24 00:56:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Sep 24 01:37:28 2011] Not generating rmf since there are only 86 counts
[Sat Sep 24 01:37:28 2011] rmf not generated due to insufficient counts
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Sep 24 02:26:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:38 2011] Using photon index=1.80, rate=0.00364, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src23.arf
[Sat Sep 24 02:26:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:38 2011] Updating source flux to 3.9e-14
[Sat Sep 24 02:26:39 2011] Flag b found in src. 23 procflags, skipping spectral fitting
[Sat Sep 24 02:26:39 2011] Flag p found in src. 23 procflags, skipping spectral fitting
[Sat Sep 24 02:26:39 2011] Flag c found in src. 23 procflags, skipping spectral fitting
[Sat Sep 24 02:26:39 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting