[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (302.7, 325.8) = 1 52 53.04 36 10 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.3 +/- 24.6
  Background counts = 136.2
  Rate = 0.008 +/- 0.001

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 2.01'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.43"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.025
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.43"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Sep 23 13:53:27 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 23 14:16:53 2011] Spatial fit model total counts = 3172.660000, observed total counts = 3168.000000
[Fri Sep 23 14:16:53 2011] Offset between fit and detection position for source 21 = 2.051385 pixels
[Fri Sep 23 14:16:53 2011] Warning, changing simple spatial fit ID from 10 to 5
[Fri Sep 23 14:16:53 2011] 3145.266000 total counts/ 2869.670000 bgd. counts: snr = 5.144663
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.051385 pixels
  Position = (300.7, 325.1) = 1 52 53.74 36 10 21.4
  Extent = 14.5 (14.4-29.0)", rotation angle = 0
  Source counts = 275.6 +/- 56.1
  Background counts = 2869.7
  Rate = 0.01 +/- 0.002
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:16:53 2011] Source is confused with source 6
[Fri Sep 23 16:13:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 14.49"
[Fri Sep 23 16:13:59 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.091
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 14.49"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:34:17 2011] Warning, spatial fit 9 centroid is now closest to src. 23
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:49:14 2011] XMMSAS src. selection expression = ellipse(26114.772000, 28236.622000, 869.208025, 869.208025, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21_src.reg
[Sat Sep 24 00:49:15 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (251, 275) - (351, 375)
[Sat Sep 24 00:49:15 2011] XMMSAS bgd. selection expression = annulus(26114.772000, 28236.622000, 1448.680042, 2897.360083, X, Y) && !ellipse(27972.712800, 26758.366400, 1165.254820, 1165.254820, 0.000000, X, Y) && !ellipse(26376.300600, 27774.010000, 1188.608034, 1188.608034, 0.000000, X, Y) && !ellipse(29478.938385, 28270.684998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28765.545288, 25373.416138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.167847, 25447.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22946.814941, 26668.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29573.247681, 27437.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.135956, 28649.642639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.619171, 25626.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25579.600000, 28558.852000, 2192.128063, 499.243214, 118.416000, X, Y) && !ellipse(27788.672394, 29178.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.410000, 24832.094000, 1221.984035, 1221.984035, 0.000000, X, Y) && !ellipse(24797.764000, 27376.730200, 1115.472032, 1115.472032, 0.000000, X, Y) && !ellipse(28252.330780, 28924.055847, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 00:49:15 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21.gif
[Sat Sep 24 00:54:35 2011] Mean detx,y = (785.69, -1998.77) 
[Sat Sep 24 00:54:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:54:41 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:54:41 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Sep 24 00:54:41 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Sep 24 02:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:37 2011] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src21.arf
[Sat Sep 24 02:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:37 2011] Updating source flux to 1.1e-13
[Sat Sep 24 02:26:39 2011] Flag c found in src. 21 procflags, skipping spectral fitting