[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (309.6, 338.0) = 1 52 50.56 36 11 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.1 +/- 21.8
  Background counts = 126.3
  Rate = 0.008 +/- 0.001

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 2.98'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.92"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.789
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 7.92"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 23 14:16:53 2011] Warning, spatial fit 12 centroid is now closest to src. 15
[Fri Sep 23 14:16:53 2011] Spatial fit model total counts = 2266.120000, observed total counts = 2263.000000
[Fri Sep 23 14:16:53 2011] Offset between fit and detection position for source 16 = 1.471581 pixels
[Fri Sep 23 14:16:53 2011] Warning, changing simple spatial fit ID from 12 to 18
[Fri Sep 23 14:16:53 2011] 2193.704800 total counts/ 2113.410000 bgd. counts: snr = 1.746608
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.471581 pixels
  Position = (311.0, 338.0) = 1 52 50.03 36 11 17.4
  Extent = 9.3 (3.9-15.2)", rotation angle = 0
  Source counts = 80.3 +/- 46.8
  Background counts = 2113.4
  Rate = 0.003 +/- 0.002
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:13:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 9.26"
[Fri Sep 23 16:13:59 2011] source mask rpix=2.1, npix_max = 27, mask sum = 32, frac = 1.157
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 9.26"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 23 17:34:17 2011] Spatial fit model total counts = 1830.990000, observed total counts = 1831.000000
[Fri Sep 23 17:34:17 2011] Offset between fit and detection position for source 16 = 1.582829 pixels
[Fri Sep 23 17:34:17 2011] 1747.153600 total counts/ 1706.600000 bgd. counts: snr = 0.981666
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.582829 pixels
  Position = (309.5, 338.2) = 1 52 50.60 36 11 18.1
  Extent = 5.2 (2.3-8.9)", rotation angle = 0
  Source counts = 40.6 +/- 41.8
  Background counts = 1706.6
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability