[Fri Sep 23 11:49:33 2011] Detection parameters:
  Position = (321.9, 308.0) = 1 52 46.11 36 9 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3388.6 +/- 75.3
  Background counts = 149.9
  Rate = 0.1 +/- 0.003

[Fri Sep 23 11:49:33 2011] Off-axis axis estimate = 1.84'
[Fri Sep 23 13:03:36 2011] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:03:36 2011] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Sep 23 13:03:36 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Fri Sep 23 13:03:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 13:53:27 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 13:53:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 13:53:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 13:53:28 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 13:53:28 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 14:16:53 2011] Spatial fit model total counts = 10406.600000, observed total counts = 10409.000000
[Fri Sep 23 14:16:53 2011] Offset between fit and detection position for source 1 = 0.180319 pixels
[Fri Sep 23 14:16:53 2011] 10353.130000 total counts/ 6165.290000 bgd. counts: snr = 53.335126
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180319 pixels
  Position = (322.1, 308.1) = 1 52 46.07 36 9 7.4
  Extent = 14.6 (14.3-14.7)", rotation angle = 0
  Source counts = 4187.8 +/- 101.8
  Background counts = 6165.3
  Rate = 0.2 +/- 0.004
[Fri Sep 23 14:16:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 14:16:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 14:16:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 14:16:53 2011] Source does appear to be extended
[Fri Sep 23 14:16:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:13:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:13:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 16:13:59 2011] Initial guess for spatial extent in simple fitting = 14.57"
[Fri Sep 23 16:13:59 2011] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.080
[Fri Sep 23 16:13:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.57"
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 17:06:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 17:06:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 17:06:34 2011] fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 17:06:34 2011] Fit fullrun_mos1_xmm0109980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 17:34:17 2011] Warning, spatial fit 1 centroid is now closest to src. 35
[Fri Sep 23 17:34:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 17:34:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 17:34:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 17:34:17 2011] Source does appear to be extended
[Fri Sep 23 17:34:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 00:49:14 2011] Counts = 4187.840000, rescaling region sizes by 2.000000
[Sat Sep 24 00:49:14 2011] XMMSAS src. selection expression = ellipse(27972.712800, 26758.366400, 1747.882230, 1747.882230, 0.000000, X, Y)
[Sat Sep 24 00:49:14 2011] Writing source region out to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 00:49:14 2011] Extracting stamp from image fullrun_mos1_xmm0109980101_pi300-10000_cl_sm2.00.img.gz, (222, 208) - (423, 409)
[Sat Sep 24 00:49:14 2011] XMMSAS bgd. selection expression = annulus(27972.712800, 26758.366400, 5826.274100, 11652.548200, X, Y) && !ellipse(29984.154000, 28176.354000, 826.296024, 826.296024, 0.000000, X, Y) && !ellipse(29629.343580, 30847.238200, 366.344811, 366.344811, 0.000000, X, Y) && !ellipse(22799.220600, 30624.858200, 306.859209, 306.859209, 0.000000, X, Y) && !ellipse(26376.300600, 27774.010000, 1188.608034, 1188.608034, 0.000000, X, Y) && !ellipse(33777.144073, 23840.572144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21535.880600, 30522.959625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.938385, 28270.684998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26114.772000, 28236.622000, 1158.944033, 1158.944033, 0.000000, X, Y) && !ellipse(28765.545288, 25373.416138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.167847, 25447.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22946.814941, 26668.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31477.499000, 22071.194400, 338.879141, 338.879141, 0.000000, X, Y) && !ellipse(29573.247681, 27437.454498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.135956, 28649.642639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.619171, 25626.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25579.600000, 28558.852000, 2192.128063, 499.243214, 118.416000, X, Y) && !ellipse(27788.672394, 29178.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.410000, 24832.094000, 1221.984035, 1221.984035, 0.000000, X, Y) && !ellipse(24797.764000, 27376.730200, 1115.472032, 1115.472032, 0.000000, X, Y) && !ellipse(30276.724243, 26402.537354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28252.330780, 28924.055847, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 00:49:14 2011] Writing fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 00:49:21 2011] Mean detx,y = (140.87, 159.23) 
[Sat Sep 24 00:49:23 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 00:52:40 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 00:52:40 2011] Setting source spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 00:52:40 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep 24 02:26:37 2011] Updating aperture counts using extracted products
[Sat Sep 24 02:26:37 2011] Error reading totcts from fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 02:26:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:26:37 2011] Using photon index=1.80, rate=0.175, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 02:26:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:26:37 2011] Updating source flux to 1.5e-12
[Sat Sep 24 02:27:39 2011] Reading fit data from xmm0109980101/analysis//spectral/fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Sep 24 02:27:39 2011] Spectral fit parameter nH value = 3.81263e+21
[Sat Sep 24 02:27:39 2011] Spectral fit parameter PhoIndex value = 3.41121
[Sat Sep 24 02:27:39 2011] Failed to get F(0.3-8.0) from xmm0109980101/analysis//spectral/fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 02:27:39 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 02:27:39 2011] Using Nh = 3.8e+21, photon index=3.41, rate=0.175, arf fullrun_mos1_xmm0109980101_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 02:27:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 02:27:39 2011] Updating source flux to 1.1e-12