[Sat Mar 10 08:34:05 2012] Detection parameters:
  Position = (355.2, 280.8) = 14 17 40.99 25 8 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.1 +/- 13.5
  Background counts = 10.4
  Rate = 0.006 +/- 0.0007

[Sat Mar 10 08:34:05 2012] Off-axis axis estimate = 4.31'
[Sat Mar 10 09:55:43 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 09:55:43 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Mar 10 09:55:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Sat Mar 10 09:55:43 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.58"
[Sat Mar 10 11:47:54 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Mar 10 11:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13.csv
[Sat Mar 10 11:47:54 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Mar 10 11:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13.csv
[Sat Mar 10 11:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 11:47:55 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Mar 10 11:47:55 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Mar 10 11:47:55 2012] Fit fullrun_mos2_xmm0109960101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Mar 10 11:48:19 2012] Source 19 is offset by 7.876275 and 5.059027 pixels which is larger than
2 X fitted extent = 0.986579 x 0.986579, not incorporating fit results
[Sat Mar 10 11:48:19 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 11:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 11:48:19 2012] Assessing source extent using major
[Sat Mar 10 11:48:19 2012] Source does appear to be extended
[Sat Mar 10 11:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 13:11:02 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 13:11:02 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat Mar 10 13:11:02 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Sat Mar 10 13:11:02 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.58"
[Sat Mar 10 14:07:49 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_src12.ximg exists
[Sat Mar 10 14:07:49 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Mar 10 14:07:49 2012] Fit fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_src12 appears to have run properly
[Sat Mar 10 14:07:50 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Mar 10 14:07:50 2012] fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Mar 10 14:07:50 2012] Fit fullrun_mos2_xmm0109960101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Mar 10 14:08:07 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.126457 pixels away
[Sat Mar 10 14:08:07 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 14:08:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 14:08:07 2012] Assessing source extent using major
[Sat Mar 10 14:08:07 2012] Source does appear to be extended
[Sat Mar 10 14:08:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 15:28:38 2012] XMMSAS src. selection expression = ellipse(30854.917938, 24384.813324, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 15:28:38 2012] Writing source region out to fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19_src.reg
[Sat Mar 10 15:28:38 2012] Extracting stamp from image fullrun_mos2_xmm0109960101_pi300-10000_cl_sm2.00.img.gz, (318, 243) - (393, 318)
[Sat Mar 10 15:28:38 2012] XMMSAS bgd. selection expression = annulus(30854.917938, 24384.813324, 1087.500000, 2175.000000, X, Y)
[Sat Mar 10 15:28:38 2012] Writing fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19.gif
[Sat Mar 10 15:41:32 2012] Mean detx,y = (4117.62, 2638.93) 
[Sat Mar 10 15:41:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 15:41:44 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 15:41:45 2012] Setting source spectrum file to fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Mar 10 15:41:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Mar 10 16:09:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 16:09:13 2012] rmf not generated due to insufficient counts
[Sat Mar 10 16:15:19 2012] Updating aperture counts using extracted products
[Sat Mar 10 16:15:19 2012] Error reading totcts from fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Mar 10 16:15:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 16:15:19 2012] Using photon index=1.80, rate=0.00595, arf fullrun_mos2_xmm0109960101_pi300-10000_pass1_cl_src19.arf
[Sat Mar 10 16:15:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 16:15:19 2012] Updating source flux to 8e-14
[Sat Mar 10 16:17:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting