[Thu Jun 20 18:36:30 2013] Detection parameters:
  Position = (251.1, 358.7) = 23 57 26.80 -34 42 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.7 +/- 13.3
  Background counts = 48.2
  Rate = 0.004 +/- 0.0007

[Thu Jun 20 18:36:31 2013] Off-axis axis estimate = 5.55'
[Thu Jun 20 18:40:36 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:40:36 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Jun 20 18:40:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.585
[Thu Jun 20 18:40:36 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.20"
[Thu Jun 20 20:35:39 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun 20 20:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28.csv
[Thu Jun 20 20:35:39 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun 20 20:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28.csv
[Thu Jun 20 20:35:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 20:35:40 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun 20 20:35:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 20 20:35:40 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun 20 20:35:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 20 20:35:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:26 2013] Spatial fit model total counts = 540.866000, observed total counts = 367.000000
[Thu Jun 20 23:28:26 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 23:28:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:26 2013] Assessing source extent using major
[Thu Jun 20 23:28:26 2013] Source does appear to be extended
[Thu Jun 20 23:28:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 23:28:26 2013] Deleting source due to low Poisson probability 0.9