[Thu Jun 20 18:36:29 2013] Detection parameters:
  Position = (326.2, 322.8) = 23 57 0.30 -34 44 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1942.2 +/- 60.2
  Background counts = 412.5
  Rate = 0.1 +/- 0.004

[Thu Jun 20 18:36:31 2013] Off-axis axis estimate = 2.68'
[Thu Jun 20 18:40:36 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:40:36 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Jun 20 18:40:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.005
[Thu Jun 20 18:40:36 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.77"
[Thu Jun 20 20:35:38 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 20 20:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 20:35:38 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 20 20:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 20:35:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 20:35:39 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 20 20:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 20:35:39 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 20 20:35:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 20:35:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:26 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Thu Jun 20 23:28:26 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:26 2013] Assessing source extent using major
[Thu Jun 20 23:28:26 2013] Source does appear to be extended
[Thu Jun 20 23:28:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 23:28:26 2013] Source is confused with source 5
[Thu Jun 20 23:28:45 2013] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 23:28:45 2013] Initial guess for spatial extent in simple fitting = 7.77"
[Thu Jun 20 23:28:45 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.005
[Thu Jun 20 23:28:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.77"
[Fri Jun 21 00:15:37 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 21 00:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 00:15:37 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 21 00:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 00:15:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 00:15:38 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 21 00:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 00:15:38 2013] fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 21 00:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 00:15:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:27 2013] Spatial fit model total counts = 15467.200000, observed total counts = 10528.000000
[Fri Jun 21 03:22:27 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 03:22:28 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:22:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:22:28 2013] Assessing source extent using major
[Fri Jun 21 03:22:28 2013] Source does appear to be extended
[Fri Jun 21 03:22:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:22:53 2013] Counts = 1942.236938, rescaling region sizes by 2.000000
[Fri Jun 21 03:22:53 2013] XMMSAS src. selection expression = ellipse(28334.740234, 28031.867767, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 21 03:22:53 2013] Writing source region out to fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 21 03:22:53 2013] Extracting stamp from image fullrun_pn_xmm0109950201_pi300-10000_cl_sm2.00.img.gz, (251, 248) - (401, 398)
[Fri Jun 21 03:22:53 2013] XMMSAS bgd. selection expression = annulus(28334.740234, 28031.867767, 4350.000000, 8700.000000, X, Y) && !ellipse(28268.708800, 26663.237800, 5065.368146, 3874.488111, 48.896800, X, Y) && !ellipse(29150.930756, 27703.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20786.539734, 22574.362122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.158000, 28870.382000, 1322.232038, 1322.232038, 0.000000, X, Y) && !ellipse(30242.612427, 29001.149933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30501.653015, 28048.859955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29858.557129, 25453.470581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34979.004150, 25357.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25606.663116, 25018.733429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25458.236359, 26495.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30918.940000, 29414.514000, 1382.880040, 1382.880040, 0.000000, X, Y)
[Fri Jun 21 03:22:53 2013] Writing fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3.gif
[Fri Jun 21 03:34:18 2013] Mean detx,y = (220.68, -1192.16) 
[Fri Jun 21 03:34:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:38:17 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:38:17 2013] Setting source spectrum file to fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 21 03:38:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 21 04:30:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 04:30:01 2013] rmf not generated due to insufficient counts
[Fri Jun 21 09:01:58 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:01:58 2013] Total counts from fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 34663.00
[Fri Jun 21 09:01:58 2013] Total counts from fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 60711.00
[Fri Jun 21 09:01:59 2013] Got source and background scale factors 4393126.000000, 141897233.000000
[Fri Jun 21 09:01:59 2013] User source parameters:
  Position = (326.2, 322.8) = 23 57 0.30 -34 44 35.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32783.4 +/- 187.2
  Background aperture counts = 1879.6
  Rate = 2 +/- 0.009

[Fri Jun 21 09:01:59 2013] Updating counts from extracted products
[Fri Jun 21 09:01:59 2013] Set source signif. to 32783.39/43.35 = 756.17
[Fri Jun 21 09:02:01 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:02:01 2013] Using photon index=1.80, rate=1.6, arf fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3.arf
[Fri Jun 21 09:02:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:02:01 2013] Updating source flux to 4.1e-12
[Fri Jun 21 09:02:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 09:02:25 2013] xmm0109950201/analysis//spectral/fullrun_pn_xmm0109950201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete