[Thu Jun 20 18:37:42 2013] Detection parameters:
  Position = (335.7, 319.7) = 23 56 56.96 -34 44 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.2 +/- 33.7
  Background counts = 213.1
  Rate = 0.02 +/- 0.002

[Thu Jun 20 18:37:43 2013] Off-axis axis estimate = 3.11'
[Thu Jun 20 22:01:57 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:01:57 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Thu Jun 20 22:01:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.962
[Thu Jun 20 22:01:57 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.98"
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:37 2013] Source 6 is offset by 1.878987 and 6.051642 pixels which is larger than
2 X fitted extent = 1.390510 x 1.390510, not incorporating fit results
[Thu Jun 20 23:28:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:37 2013] Assessing source extent using major
[Thu Jun 20 23:28:37 2013] Source does appear to be extended
[Thu Jun 20 23:28:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 01:31:08 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:31:08 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Jun 21 01:31:08 2013] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.962
[Fri Jun 21 01:31:08 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.98"
[Fri Jun 21 03:22:17 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 21 03:22:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 03:22:17 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 03:22:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 03:22:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:42 2013] Source 6 is offset by 1.878913 and 6.051642 pixels which is larger than
2 X fitted extent = 1.390533 x 1.390533, not incorporating fit results
[Fri Jun 21 03:22:42 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:22:42 2013] Assessing source extent using major
[Fri Jun 21 03:22:42 2013] Source does appear to be extended
[Fri Jun 21 03:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:56:02 2013] XMMSAS src. selection expression = ellipse(29159.310028, 27766.218811, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing source region out to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 21 07:56:03 2013] Extracting stamp from image fullrun_mos2_xmm0109950201_pi300-10000_cl_sm2.00.img.gz, (298, 282) - (373, 357)
[Fri Jun 21 07:56:03 2013] XMMSAS bgd. selection expression = annulus(29159.310028, 27766.218811, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.744171, 26934.023773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.668610, 26466.972260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.197815, 25501.972656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.034000, 28207.602000, 2393.248069, 1948.416056, 0.000000, X, Y) && !ellipse(29561.982391, 28851.350525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.923676, 28733.103485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.413483, 29082.919525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26262.447388, 28211.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.998000, 29383.168000, 2464.128071, 2464.128071, 0.000000, X, Y) && !ellipse(30703.584000, 25540.482000, 1318.328038, 1318.328038, 0.000000, X, Y) && !ellipse(26161.466003, 25194.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28814.827942, 29253.911377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26691.626000, 30124.434000, 1292.824037, 1292.824037, 0.000000, X, Y) && !ellipse(30545.046814, 27886.037628, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6.gif
[Fri Jun 21 08:04:38 2013] Mean detx,y = (-880.93, 1423.55) 
[Fri Jun 21 08:04:40 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 08:04:51 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 08:04:52 2013] Setting source spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 21 08:04:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 21 08:16:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 08:16:00 2013] rmf not generated due to insufficient counts
[Fri Jun 21 09:02:06 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 3335.00
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_bgd.pi.gz = 2194.00
[Fri Jun 21 09:02:06 2013] Got source and background scale factors 1146716.000000, 1389676.000000
[Fri Jun 21 09:02:06 2013] User source parameters:
  Position = (335.7, 319.7) = 23 56 56.96 -34 44 44.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1524.6 +/- 58.8
  Background aperture counts = 1810.4
  Rate = 0.06 +/- 0.002

[Fri Jun 21 09:02:06 2013] Updating counts from extracted products
[Fri Jun 21 09:02:06 2013] Set source signif. to 1524.58/42.55 = 35.83
[Fri Jun 21 09:02:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:02:10 2013] Using photon index=1.80, rate=0.0625, arf fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6.arf
[Fri Jun 21 09:02:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:02:10 2013] Updating source flux to 6.4e-13
[Fri Jun 21 09:02:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 09:02:22 2013] xmm0109950201/analysis//spectral/fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete