[Thu Jun 20 18:37:42 2013] Detection parameters:
  Position = (316.6, 283.9) = 23 57 3.70 -34 47 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.9 +/- 26.4
  Background counts = 167.0
  Rate = 0.01 +/- 0.001

[Thu Jun 20 18:37:43 2013] Off-axis axis estimate = 1.69'
[Thu Jun 20 22:01:57 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:01:57 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 20 22:01:57 2013] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.636
[Thu Jun 20 22:01:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.27"
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:37 2013] Source 5 is offset by -4.152575 and -4.727418 pixels which is larger than
2 X fitted extent = 2.398694 x 2.398694, not incorporating fit results
[Thu Jun 20 23:28:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:37 2013] Assessing source extent using major
[Thu Jun 20 23:28:37 2013] Source does appear to be extended
[Thu Jun 20 23:28:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 23:28:37 2013] Source is confused with source 4
[Fri Jun 21 01:31:08 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:31:08 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun 21 01:31:08 2013] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.636
[Fri Jun 21 01:31:08 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.27"
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5.csv
[Fri Jun 21 03:22:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 03:22:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:42 2013] Warning, spatial fit 5 centroid is now closest to src. 1
[Fri Jun 21 03:22:42 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:22:42 2013] Assessing source extent using major
[Fri Jun 21 03:22:42 2013] Source does appear to be extended
[Fri Jun 21 03:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:56:03 2013] XMMSAS src. selection expression = ellipse(27497.505951, 24651.436676, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing source region out to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 21 07:56:03 2013] Extracting stamp from image fullrun_mos2_xmm0109950201_pi300-10000_cl_sm2.00.img.gz, (279, 246) - (354, 321)
[Fri Jun 21 07:56:03 2013] XMMSAS bgd. selection expression = annulus(27497.505951, 24651.436676, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.744171, 26934.023773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.668610, 26466.972260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.197815, 25501.972656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.082825, 24686.671570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.034000, 28207.602000, 2393.248069, 1948.416056, 0.000000, X, Y) && !ellipse(26812.917267, 24147.785583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30703.584000, 25540.482000, 1318.328038, 1318.328038, 0.000000, X, Y) && !ellipse(26161.466003, 25194.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.810730, 25705.385071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27876.925568, 23881.239227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5.gif
[Fri Jun 21 08:04:59 2013] Mean detx,y = (-793.85, -1967.56) 
[Fri Jun 21 08:05:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 08:05:15 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 08:05:15 2013] Setting source spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 21 08:05:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 21 08:16:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 08:16:19 2013] rmf not generated due to insufficient counts
[Fri Jun 21 09:02:06 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2059.00
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 5351.00
[Fri Jun 21 09:02:06 2013] Got source and background scale factors 1167528.000000, 4685948.000000
[Fri Jun 21 09:02:06 2013] User source parameters:
  Position = (316.6, 283.9) = 23 57 3.70 -34 47 16.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 725.8 +/- 46.4
  Background aperture counts = 1333.2
  Rate = 0.03 +/- 0.002

[Fri Jun 21 09:02:06 2013] Updating counts from extracted products
[Fri Jun 21 09:02:06 2013] Set source signif. to 725.77/36.51 = 19.88
[Fri Jun 21 09:02:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:02:10 2013] Using photon index=1.80, rate=0.0298, arf fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5.arf
[Fri Jun 21 09:02:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:02:10 2013] Updating source flux to 3e-13
[Fri Jun 21 09:02:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 09:02:22 2013] xmm0109950201/analysis//spectral/fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete