[Thu Jun 20 18:37:43 2013] Detection parameters:
  Position = (297.5, 296.0) = 23 57 10.44 -34 46 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.4 +/- 21.7
  Background counts = 130.6
  Rate = 0.005 +/- 0.0009

[Thu Jun 20 18:37:43 2013] Off-axis axis estimate = 0.19'
[Thu Jun 20 22:01:57 2013] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:01:57 2013] Initial guess for spatial extent in simple fitting = 6.52"
[Thu Jun 20 22:01:57 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Thu Jun 20 22:01:57 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 6.52"
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:16 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jun 20 23:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 20 23:28:16 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jun 20 23:28:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 20 23:28:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:37 2013] Source 20 is offset by 3.103664 and 5.019093 pixels which is larger than
2 X fitted extent = 1.900166 x 1.900166, not incorporating fit results
[Thu Jun 20 23:28:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:37 2013] Assessing source extent using major
[Thu Jun 20 23:28:37 2013] Source does appear to be extended
[Thu Jun 20 23:28:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 23:28:37 2013] Source is confused with source 21
[Fri Jun 21 01:31:08 2013] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:31:08 2013] Initial guess for spatial extent in simple fitting = 6.52"
[Fri Jun 21 01:31:08 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Fri Jun 21 01:31:08 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 6.52"
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 21 03:22:18 2013] Fit fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 21 03:22:18 2013] Fit fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun 21 03:22:42 2013] Source 20 is offset by -6.476612 and -4.479758 pixels which is larger than
2 X fitted extent = 1.880175 x 5.997425, not incorporating fit results
[Fri Jun 21 03:22:42 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:22:42 2013] Assessing source extent using major
[Fri Jun 21 03:22:42 2013] Source does appear to be extended
[Fri Jun 21 03:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:56:03 2013] XMMSAS src. selection expression = ellipse(25835.810730, 25705.385071, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing source region out to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_src.reg
[Fri Jun 21 07:56:03 2013] Extracting stamp from image fullrun_mos2_xmm0109950201_pi300-10000_cl_sm2.00.img.gz, (260, 259) - (335, 334)
[Fri Jun 21 07:56:03 2013] XMMSAS bgd. selection expression = annulus(25835.810730, 25705.385071, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.744171, 26934.023773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.668610, 26466.972260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.197815, 25501.972656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.505951, 24651.436676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.082825, 24686.671570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.034000, 28207.602000, 2393.248069, 1948.416056, 0.000000, X, Y) && !ellipse(26812.917267, 24147.785583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.923676, 28733.103485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26262.447388, 28211.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.998000, 29383.168000, 2464.128071, 2464.128071, 0.000000, X, Y) && !ellipse(26161.466003, 25194.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27876.925568, 23881.239227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 07:56:03 2013] Writing fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20.gif
[Fri Jun 21 08:11:48 2013] Mean detx,y = (1107.73, -1811.55) 
[Fri Jun 21 08:11:51 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 08:12:04 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 08:12:04 2013] Setting source spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun 21 08:12:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jun 21 09:01:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 09:01:10 2013] rmf not generated due to insufficient counts
[Fri Jun 21 09:02:09 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:02:09 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 1557.00
[Fri Jun 21 09:02:09 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 2578.00
[Fri Jun 21 09:02:09 2013] Got source and background scale factors 1328000.000000, 4763160.000000
[Fri Jun 21 09:02:10 2013] User source parameters:
  Position = (297.5, 296.0) = 23 57 10.44 -34 46 29.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 838.2 +/- 40.5
  Background aperture counts = 718.8
  Rate = 0.03 +/- 0.002

[Fri Jun 21 09:02:10 2013] Updating counts from extracted products
[Fri Jun 21 09:02:10 2013] Set source signif. to 838.24/26.81 = 31.27
[Fri Jun 21 09:02:11 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:02:11 2013] Using photon index=1.80, rate=0.0344, arf fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20.arf
[Fri Jun 21 09:02:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:02:11 2013] Updating source flux to 3.8e-13
[Fri Jun 21 09:02:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 09:02:22 2013] xmm0109950201/analysis//spectral/fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete