[Thu Jun 20 18:37:42 2013] Detection parameters:
  Position = (327.9, 304.8) = 23 56 59.71 -34 45 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2322.0 +/- 64.3
  Background counts = 215.0
  Rate = 0.1 +/- 0.003

[Thu Jun 20 18:37:43 2013] Off-axis axis estimate = 2.19'
[Thu Jun 20 22:01:57 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:01:57 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jun 20 22:01:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Thu Jun 20 22:01:57 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.52"
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 20 23:28:15 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 20 23:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 20 23:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 23:28:37 2013] Spatial fit model total counts = 11997.600000, observed total counts = 10008.000000
[Thu Jun 20 23:28:37 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 23:28:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 23:28:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 23:28:37 2013] Assessing source extent using major
[Thu Jun 20 23:28:37 2013] Source does appear to be extended
[Thu Jun 20 23:28:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 23:28:37 2013] Source is confused with source 3
[Fri Jun 21 01:31:08 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:31:08 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Jun 21 01:31:08 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Fri Jun 21 01:31:08 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.52"
[Fri Jun 21 03:22:17 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 21 03:22:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 03:22:17 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 21 03:22:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 03:22:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 03:22:18 2013] fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 21 03:22:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 03:22:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:22:42 2013] Spatial fit model total counts = 11979.800000, observed total counts = 10008.000000
[Fri Jun 21 03:22:42 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 03:22:42 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:22:42 2013] Assessing source extent using major
[Fri Jun 21 03:22:42 2013] Source does appear to be extended
[Fri Jun 21 03:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:56:02 2013] Counts = 2321.969727, rescaling region sizes by 2.000000
[Fri Jun 21 07:56:02 2013] XMMSAS src. selection expression = ellipse(28480.668610, 26466.972260, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 21 07:56:02 2013] Writing source region out to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 21 07:56:02 2013] Extracting stamp from image fullrun_mos2_xmm0109950201_pi300-10000_cl_sm2.00.img.gz, (253, 230) - (403, 380)
[Fri Jun 21 07:56:02 2013] XMMSAS bgd. selection expression = annulus(28480.668610, 26466.972260, 4350.000000, 8700.000000, X, Y) && !ellipse(28094.744171, 26934.023773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.197815, 25501.972656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.310028, 27766.218811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.505951, 24651.436676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.082825, 24686.671570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.034000, 28207.602000, 2393.248069, 1948.416056, 0.000000, X, Y) && !ellipse(26812.917267, 24147.785583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29561.982391, 28851.350525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.923676, 28733.103485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.413483, 29082.919525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26262.447388, 28211.164551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20683.447601, 19012.303131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.998000, 29383.168000, 2464.128071, 2464.128071, 0.000000, X, Y) && !ellipse(30703.584000, 25540.482000, 1318.328038, 1318.328038, 0.000000, X, Y) && !ellipse(26161.466003, 25194.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28814.827942, 29253.911377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26691.626000, 30124.434000, 1292.824037, 1292.824037, 0.000000, X, Y) && !ellipse(25835.810730, 25705.385071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30545.046814, 27886.037628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27876.925568, 23881.239227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 07:56:02 2013] Writing fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2.gif
[Fri Jun 21 08:00:11 2013] Mean detx,y = (-696.31, 32.18) 
[Fri Jun 21 08:00:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 08:04:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 08:04:11 2013] Setting source spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 21 08:04:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 21 08:14:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 08:14:22 2013] rmf not generated due to insufficient counts
[Fri Jun 21 09:02:06 2013] Updating aperture counts using extracted products
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 22232.00
[Fri Jun 21 09:02:06 2013] Total counts from fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 31034.00
[Fri Jun 21 09:02:06 2013] Got source and background scale factors 4947296.000000, 156581352.000000
[Fri Jun 21 09:02:06 2013] User source parameters:
  Position = (327.9, 304.8) = 23 56 59.71 -34 45 48.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 21251.5 +/- 150.1
  Background aperture counts = 980.5
  Rate = 0.9 +/- 0.006

[Fri Jun 21 09:02:06 2013] Updating counts from extracted products
[Fri Jun 21 09:02:06 2013] Set source signif. to 21251.46/31.31 = 678.67
[Fri Jun 21 09:02:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 09:02:10 2013] Using photon index=1.80, rate=0.871, arf fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2.arf
[Fri Jun 21 09:02:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 09:02:10 2013] Updating source flux to 8.3e-12
[Fri Jun 21 09:02:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 09:02:22 2013] xmm0109950201/analysis//spectral/fullrun_mos2_xmm0109950201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete