[Mon May 28 10:19:50 2012] Detection parameters:
  Position = (352.9, 310.2) = 23 56 50.91 -34 45 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 24.2
  Background counts = 212.6
  Rate = 0.005 +/- 0.0009

[Mon May 28 10:19:51 2012] Off-axis axis estimate = 4.04'
[Mon May 28 12:17:55 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon May 28 12:17:55 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Mon May 28 12:17:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Mon May 28 12:17:55 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.45"
[Mon May 28 13:32:28 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14.ximg exists
[Mon May 28 13:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14.csv
[Mon May 28 13:32:28 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May 28 13:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14.csv
[Mon May 28 13:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 13:32:29 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May 28 13:32:29 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May 28 13:32:29 2012] Fit fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon May 28 13:32:45 2012] Source 21 is offset by 7.664401 and -2.125528 pixels which is larger than
2 X fitted extent = 3.308855 x 3.308855, not incorporating fit results
[Mon May 28 13:32:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 13:32:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 13:32:45 2012] Assessing source extent using major
[Mon May 28 13:32:45 2012] Source does appear to be extended
[Mon May 28 13:32:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 15:02:25 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Mon May 28 15:02:25 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Mon May 28 15:02:25 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Mon May 28 15:02:25 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.45"
[Mon May 28 16:13:15 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 28 16:13:15 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 28 16:13:15 2012] Fit fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src13 appears to have run properly
[Mon May 28 16:13:16 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 28 16:13:16 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 28 16:13:16 2012] Fit fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon May 28 16:13:28 2012] Source 21 is offset by 7.664401 and -1.998859 pixels which is larger than
2 X fitted extent = 3.754018 x 3.754018, not incorporating fit results
[Mon May 28 16:13:28 2012] Vigneting correction estimate = 1.000000
[Mon May 28 16:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 16:13:28 2012] Assessing source extent using major
[Mon May 28 16:13:28 2012] Source does appear to be extended
[Mon May 28 16:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:00:04 2012] XMMSAS src. selection expression = ellipse(30653.472900, 26934.560089, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 20:00:04 2012] Writing source region out to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21_src.reg
[Wed May 30 20:00:04 2012] Extracting stamp from image fullrun_mos2_xmm0109950101_pi300-10000_cl_sm2.00.img.gz, (315, 273) - (390, 348)
[Wed May 30 20:00:04 2012] XMMSAS bgd. selection expression = annulus(30653.472900, 26934.560089, 1087.500000, 2175.000000, X, Y) && !ellipse(28499.790131, 26467.622742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.806946, 26933.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.672882, 25093.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.904602, 28905.996338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29454.671417, 24835.685089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30195.185638, 26406.777435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29941.967529, 28644.308685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29734.941620, 25282.452179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.549072, 24057.835846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28896.140869, 29745.144897, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 20:00:04 2012] Writing fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21.gif
[Wed May 30 20:08:29 2012] Mean detx,y = (-2508.11, 1388.09) 
[Wed May 30 20:08:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 20:08:39 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 20:08:39 2012] Setting source spectrum file to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 30 20:08:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 30 20:16:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 20:16:17 2012] rmf not generated due to insufficient counts
[Wed May 30 20:18:40 2012] Updating aperture counts using extracted products
[Wed May 30 20:18:40 2012] Error reading totcts from fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 30 20:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 20:18:40 2012] Using photon index=1.80, rate=0.00515, arf fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21.arf
[Wed May 30 20:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 20:18:40 2012] Updating source flux to 5.9e-14
[Wed May 30 20:20:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 30 20:20:31 2012] xmm0109950101/analysis//spectral/fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete