[Mon May 28 10:19:50 2012] Detection parameters:
  Position = (317.6, 338.7) = 23 57 3.37 -34 43 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.0 +/- 22.7
  Background counts = 184.2
  Rate = 0.004 +/- 0.0009

[Mon May 28 10:19:51 2012] Off-axis axis estimate = 3.23'
[Mon May 28 12:17:55 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Mon May 28 12:17:55 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Mon May 28 12:17:55 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.132
[Mon May 28 12:17:55 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.05"
[Mon May 28 13:32:28 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 28 13:32:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22.csv
[Mon May 28 13:32:28 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 28 13:32:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22.csv
[Mon May 28 13:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 13:32:29 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 28 13:32:29 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 28 13:32:29 2012] Fit fullrun_mos2_xmm0109950101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon May 28 13:32:45 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.641473 pixels away
[Mon May 28 13:32:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 13:32:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 13:32:45 2012] Assessing source extent using major
[Mon May 28 13:32:45 2012] Source does appear to be extended
[Mon May 28 13:32:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 15:02:25 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Mon May 28 15:02:25 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Mon May 28 15:02:25 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.132
[Mon May 28 15:02:25 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.05"
[Mon May 28 16:13:15 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 28 16:13:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21.csv
[Mon May 28 16:13:15 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 28 16:13:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21.csv
[Mon May 28 16:13:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 16:13:16 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 28 16:13:16 2012] fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 28 16:13:16 2012] Fit fullrun_mos2_xmm0109950101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon May 28 16:13:28 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.648523 pixels away
[Mon May 28 16:13:28 2012] Vigneting correction estimate = 1.000000
[Mon May 28 16:13:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 16:13:28 2012] Assessing source extent using major
[Mon May 28 16:13:28 2012] Source does appear to be extended
[Mon May 28 16:13:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 20:00:05 2012] XMMSAS src. selection expression = ellipse(27580.765015, 29421.244598, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 20:00:05 2012] Writing source region out to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18_src.reg
[Wed May 30 20:00:05 2012] Extracting stamp from image fullrun_mos2_xmm0109950101_pi300-10000_cl_sm2.00.img.gz, (280, 301) - (355, 376)
[Wed May 30 20:00:05 2012] XMMSAS bgd. selection expression = annulus(27580.765015, 29421.244598, 1087.500000, 2175.000000, X, Y) && !ellipse(28499.790131, 26467.622742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.806946, 26933.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28620.904602, 28905.996338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30195.185638, 26406.777435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29941.967529, 28644.308685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28896.140869, 29745.144897, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 20:00:05 2012] Writing fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18.gif
[Wed May 30 20:10:03 2012] Mean detx,y = (1225.09, 2200.88) 
[Wed May 30 20:10:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 20:10:13 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 20:10:13 2012] Setting source spectrum file to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 30 20:10:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 30 20:17:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 20:17:01 2012] rmf not generated due to insufficient counts
[Wed May 30 20:18:40 2012] Updating aperture counts using extracted products
[Wed May 30 20:18:40 2012] Error reading totcts from fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 30 20:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 20:18:40 2012] Using photon index=1.80, rate=0.00399, arf fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18.arf
[Wed May 30 20:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 20:18:40 2012] Updating source flux to 4e-14
[Wed May 30 20:20:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 30 20:20:31 2012] xmm0109950101/analysis//spectral/fullrun_mos2_xmm0109950101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete