[Mon Jul 30 11:03:56 2012] Detection parameters:
  Position = (350.0, 286.0) = 15 16 31.72 6 58 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.2 +/- 24.5
  Background counts = 117.7
  Rate = 0.009 +/- 0.0009

[Mon Jul 30 11:03:57 2012] Off-axis axis estimate = 3.84'
[Mon Jul 30 12:58:33 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 12:58:33 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Mon Jul 30 12:58:33 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.683
[Mon Jul 30 12:58:33 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.35"
[Mon Jul 30 15:08:04 2012] fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jul 30 15:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14.csv
[Mon Jul 30 15:08:04 2012] fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jul 30 15:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14.csv
[Mon Jul 30 15:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 15:08:05 2012] fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jul 30 15:08:05 2012] fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jul 30 15:08:05 2012] Fit fullrun_mos1_xmm0109920101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jul 30 16:56:51 2012] Spatial fit model total counts = 1493.870000, observed total counts = 1494.000000
[Mon Jul 30 16:56:51 2012] Offset between fit and detection position for source 17 = 0.023385 pixels
[Mon Jul 30 16:56:51 2012] 1484.766000 total counts/ 1352.370000 bgd. counts: snr = 3.600204
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.023385 pixels
  Position = (350.0, 286.0) = 15 16 31.72 6 58 51.7
  Extent = 4.0 (3.1-5.1)", rotation angle = 0
  Source counts = 132.4 +/- 38.5
  Background counts = 1352.4
  Rate = 0.004 +/- 0.001
[Mon Jul 30 16:56:51 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 16:56:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 16:56:51 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 16:56:51 2012] Source does appear to be extended
[Mon Jul 30 16:56:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 00:03:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 31 00:03:28 2012] Initial guess for spatial extent in simple fitting = 4.00"
[Tue Jul 31 00:03:28 2012] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.496
[Tue Jul 31 00:03:28 2012] Skipping simple spatial due to low active detector fraction
[Tue Jul 31 03:14:44 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 03:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 03:14:44 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 03:14:44 2012] Source does appear to be extended
[Tue Jul 31 03:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 08:43:48 2012] XMMSAS src. selection expression = ellipse(30399.508700, 24835.317800, 240.189607, 240.189607, 0.000000, X, Y)
[Tue Jul 31 08:43:48 2012] Writing source region out to fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17_src.reg
[Tue Jul 31 08:43:48 2012] Extracting stamp from image fullrun_mos1_xmm0109920101_pi300-10000_cl_sm2.00.img.gz, (336, 272) - (364, 300)
[Tue Jul 31 08:43:48 2012] XMMSAS bgd. selection expression = annulus(30399.508700, 24835.317800, 400.316012, 800.632023, X, Y) && !ellipse(29714.584000, 25862.448000, 1240.696036, 1240.696036, 0.000000, X, Y) && !ellipse(28215.838000, 25038.154000, 2370.816068, 2370.816068, 0.000000, X, Y)
[Tue Jul 31 08:43:48 2012] Writing fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17.gif
[Tue Jul 31 08:55:06 2012] Mean detx,y = (-3475.61, 2754.84) 
[Tue Jul 31 08:55:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 08:55:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 08:55:14 2012] Setting source spectrum file to fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 31 08:55:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jul 31 18:06:30 2012] Updating aperture counts using extracted products
[Tue Jul 31 18:06:30 2012] Error reading totcts from fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jul 31 18:06:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 18:06:31 2012] Using photon index=1.80, rate=0.00436, arf fullrun_mos1_xmm0109920101_pi300-10000_pass1_cl_src17.arf
[Tue Jul 31 18:06:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 18:06:31 2012] Updating source flux to 6.4e-14