[Wed Aug 1 17:00:19 2012] Detection parameters: Position = (321.2, 255.1) = 14 1 25.88 -11 9 12.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 168.2 +/- 23.4 Background counts = 154.5 Rate = 0.005 +/- 0.0007 [Wed Aug 1 17:00:19 2012] Off-axis axis estimate = 3.55' [Wed Aug 1 17:02:36 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 17:02:36 2012] Initial guess for spatial extent in simple fitting = 8.21" [Wed Aug 1 17:02:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878 [Wed Aug 1 17:02:36 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.21" [Wed Aug 1 19:49:07 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65.ximg exists [Wed Aug 1 19:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65.csv [Wed Aug 1 19:49:07 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65_1.ximg exists [Wed Aug 1 19:49:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65.csv [Wed Aug 1 19:49:07 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 19:49:09 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Wed Aug 1 19:49:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65.csv [Wed Aug 1 19:49:09 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Wed Aug 1 19:49:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65.csv [Wed Aug 1 19:49:09 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 22:40:11 2012] Spatial fit model total counts = 2985.960000, observed total counts = 2980.000000 [Wed Aug 1 22:40:11 2012] Offset between fit and detection position for source 70 = 2.854181 pixels [Wed Aug 1 22:40:11 2012] Warning, changing simple spatial fit ID from 65 to 63 [Wed Aug 1 22:40:11 2012] 2872.277000 total counts/ 2563.620000 bgd. counts: snr = 6.096061 Spatial fit parameters: Offset between fit and detection position for source 70 = 2.854181 pixels Position = (318.9, 256.7) = 14 1 26.57 -11 9 5.5 Extent = 15.9 (15.9-31.9)", rotation angle = 0 Source counts = 308.7 +/- 53.6 Background counts = 2563.6 Rate = 0.007 +/- 0.001 [Wed Aug 1 22:40:11 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 22:40:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 22:40:11 2012] Assessing source extent using major axis lower bound [Wed Aug 1 22:40:11 2012] Source does appear to be extended [Wed Aug 1 22:40:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 22:40:11 2012] Source is confused with source 67 [Wed Aug 1 22:40:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 1 22:40:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 1 22:40:34 2012] Initial guess for spatial extent in simple fitting = 15.95" [Wed Aug 1 22:40:34 2012] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.922 [Wed Aug 1 22:40:34 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 15.95" [Thu Aug 2 00:25:32 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_src46.ximg exists [Thu Aug 2 00:25:32 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_src46_1.ximg exists [Thu Aug 2 00:25:32 2012] Fit fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_src46 appears to have run properly [Thu Aug 2 00:25:34 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists [Thu Aug 2 00:25:34 2012] fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists [Thu Aug 2 00:25:34 2012] Fit fullrun_pn_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly [Thu Aug 2 02:10:11 2012] Source 70 is offset by 2.109172 and 1.027724 pixels which is larger than 2 X fitted extent = 0.979122 x 0.979122, not incorporating fit results [Thu Aug 2 02:10:11 2012] Spatial fit model total counts = 2973.310000, observed total counts = 2980.000000 [Thu Aug 2 02:10:11 2012] Offset between fit and detection position for source 70 = 2.544871 pixels [Thu Aug 2 02:10:11 2012] Warning, changing simple spatial fit ID from 46 to 44 [Thu Aug 2 02:10:11 2012] 2788.140000 total counts/ 2523.510000 bgd. counts: snr = 5.267888 Spatial fit parameters: Offset between fit and detection position for source 70 = 2.544871 pixels Position = (321.1, 255.4) = 14 1 25.92 -11 9 11.2 Extent = 15.9 (15.9-31.9)", rotation angle = 0 Source counts = 264.6 +/- 52.8 Background counts = 2523.5 Rate = 0.006 +/- 0.001 [Thu Aug 2 02:10:11 2012] Vigneting correction estimate = 1.000000 [Thu Aug 2 02:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 2 02:10:11 2012] Assessing source extent using major axis lower bound [Thu Aug 2 02:10:11 2012] Source does appear to be extended [Thu Aug 2 02:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 2 02:10:31 2012] XMMSAS src. selection expression = ellipse(27887.762000, 22171.902000, 956.832028, 956.832028, 0.000000, X, Y) [Thu Aug 2 02:10:31 2012] Writing source region out to fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70_src.reg [Thu Aug 2 02:10:31 2012] Extracting stamp from image fullrun_pn_xmm0109910101_pi300-10000_cl_sm2.00.img.gz, (266, 200) - (376, 310) [Thu Aug 2 02:10:31 2012] XMMSAS bgd. selection expression = annulus(27887.762000, 22171.902000, 1594.720046, 3189.440092, X, Y) && !ellipse(24799.519000, 23897.425200, 836.520024, 836.520024, 0.000000, X, Y) && !ellipse(24677.502000, 25425.486000, 1054.368030, 1054.368030, 0.000000, X, Y) && !ellipse(26673.262726, 22986.497009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25857.765167, 22702.953156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25179.681305, 22283.936432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25272.896000, 26330.272000, 2108.736061, 2108.736061, 0.000000, X, Y) && !ellipse(26209.729126, 25959.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27245.158691, 23165.974335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27791.242462, 22749.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.679260, 22490.139282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27015.184000, 22486.908800, 903.280026, 903.280026, 0.000000, X, Y) && !ellipse(26194.967163, 22058.912079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26197.667328, 21236.677383, 870.000000, 870.000000, 0.000000, X, Y) [Thu Aug 2 02:10:31 2012] Writing fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70.gif [Thu Aug 2 02:42:13 2012] Mean detx,y = (-1344.23, -2664.20) [Thu Aug 2 02:42:16 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 2 02:42:57 2012] Binned source spectrum to 10 counts/bin [Thu Aug 2 02:42:57 2012] Setting source spectrum file to fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70_src_b10.pi.gz [Thu Aug 2 02:42:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70_bgd.pi.gz [Thu Aug 2 07:03:45 2012] Updating aperture counts using extracted products [Thu Aug 2 07:03:45 2012] Error reading totcts from fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70_src_b10.pi.gz [Thu Aug 2 07:03:47 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 2 07:03:47 2012] Using photon index=1.80, rate=0.00583, arf fullrun_pn_xmm0109910101_pi300-10000_pass1_cl_src70.arf [Thu Aug 2 07:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 2 07:03:47 2012] Updating source flux to 1.7e-14 [Thu Aug 2 07:05:15 2012] Flag b found in src. 70 procflags, skipping spectral fitting [Thu Aug 2 07:05:15 2012] Flag c found in src. 70 procflags, skipping spectral fitting