[Wed Aug  1 17:00:55 2012] Detection parameters:
  Position = (283.4, 292.9) = 14 1 37.06 -11 6 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.3 +/- 26.2
  Background counts = 106.5
  Rate = 0.005 +/- 0.0006

[Wed Aug  1 17:00:56 2012] Off-axis axis estimate = 1.16'
[Wed Aug  1 19:49:09 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 19:49:09 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Wed Aug  1 19:49:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122
[Wed Aug  1 19:49:09 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.01"
[Wed Aug  1 22:39:53 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Aug  1 22:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15.csv
[Wed Aug  1 22:39:53 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Aug  1 22:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15.csv
[Wed Aug  1 22:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 22:39:54 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Aug  1 22:39:54 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Aug  1 22:39:54 2012] Fit fullrun_mos1_xmm0109910101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Aug  1 22:40:23 2012] Warning, spatial fit 15 centroid is now closest to src. 21
[Wed Aug  1 22:40:23 2012] Spatial fit model total counts = 2376.980000, observed total counts = 2378.000000
[Wed Aug  1 22:40:23 2012] Offset between fit and detection position for source 19 = 6.179416 pixels
[Wed Aug  1 22:40:23 2012] Warning, changing simple spatial fit ID from 15 to 28
[Wed Aug  1 22:40:23 2012] 2259.536000 total counts/ 2149.280000 bgd. counts: snr = 2.378240
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 6.179416 pixels
  Position = (283.7, 286.7) = 14 1 36.98 -11 6 55.0
  Extent = 13.7 (13.6-27.3)", rotation angle = 0
  Source counts = 110.3 +/- 47.5
  Background counts = 2149.3
  Rate = 0.002 +/- 0.001
[Wed Aug  1 22:40:23 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 22:40:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 22:40:23 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 22:40:23 2012] Source does appear to be extended
[Wed Aug  1 22:40:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 22:40:23 2012] Source is confused with source 8
[Thu Aug  2 00:25:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 00:25:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 00:25:34 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Thu Aug  2 00:25:34 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.925
[Thu Aug  2 00:25:34 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.66"
[Thu Aug  2 02:09:59 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Aug  2 02:09:59 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Aug  2 02:09:59 2012] Fit fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_src14 appears to have run properly
[Thu Aug  2 02:10:00 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Aug  2 02:10:00 2012] fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Aug  2 02:10:00 2012] Fit fullrun_mos1_xmm0109910101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Aug  2 02:10:20 2012] Source 19 is offset by -4.090092 and 6.996345 pixels which is larger than
2 X fitted extent = 6.275724 x 5.549747, not incorporating fit results
[Thu Aug  2 02:10:20 2012] Warning, spatial fit 14 centroid is now closest to src. 45
[Thu Aug  2 02:10:20 2012] Spatial fit model total counts = 3135.770000, observed total counts = 3132.000000
[Thu Aug  2 02:10:20 2012] Offset between fit and detection position for source 19 = 7.276921 pixels
[Thu Aug  2 02:10:20 2012] Warning, changing simple spatial fit ID from 14 to 19
[Thu Aug  2 02:10:20 2012] 3053.571000 total counts/ 2453.550000 bgd. counts: snr = 12.113482
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.276921 pixels
  Position = (278.2, 291.6) = 14 1 38.59 -11 6 33.9
  Extent = 28.4 (28.2-28.5)", rotation angle = 0
  Source counts = 600.0 +/- 55.3
  Background counts = 2453.6
  Rate = 0.01 +/- 0.001
[Thu Aug  2 02:10:20 2012] Source 19 is offset by -4.753828 and -3.114069 pixels which is larger than
2 X fitted extent = 0.939021 x 0.939021, not incorporating fit results
[Thu Aug  2 02:10:20 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 02:10:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 02:10:20 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 02:10:20 2012] Source does appear to be extended
[Thu Aug  2 02:10:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 05:23:05 2012] XMMSAS src. selection expression = ellipse(24159.201000, 25317.886000, 1704.642049, 1704.642049, 0.000000, X, Y)
[Thu Aug  2 05:23:05 2012] Writing source region out to fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19_src.reg
[Thu Aug  2 05:23:05 2012] Extracting stamp from image fullrun_mos1_xmm0109910101_pi300-10000_cl_sm2.00.img.gz, (180, 194) - (376, 390)
[Thu Aug  2 05:23:05 2012] XMMSAS bgd. selection expression = annulus(24159.201000, 25317.886000, 2841.070082, 5682.140164, X, Y) && !ellipse(24782.169400, 23909.627400, 819.904024, 819.904024, 0.000000, X, Y) && !ellipse(23960.361755, 24568.538696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.132000, 24729.592000, 545.986416, 545.986416, 0.000000, X, Y) && !ellipse(25540.186493, 23013.628754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23864.606560, 25180.754198, 676.571219, 676.571219, 0.000000, X, Y) && !ellipse(20088.471600, 31212.036000, 456.821613, 456.821613, 0.000000, X, Y) && !ellipse(25980.576202, 24131.173065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.836000, 26005.972000, 1135.056033, 1135.056033, 0.000000, X, Y) && !ellipse(25040.104200, 27122.767400, 300.272809, 300.272809, 0.000000, X, Y) && !ellipse(25844.031000, 25358.424000, 1043.360030, 1043.360030, 0.000000, X, Y) && !ellipse(25140.084198, 25348.588959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.521851, 23014.518188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22300.684357, 24712.494385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29519.683460, 26614.762200, 439.410900, 439.410900, 0.000000, X, Y) && !ellipse(25092.710510, 21836.475052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24860.238800, 26036.018524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.118347, 24288.826050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.693420, 26220.999725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26715.947632, 23620.268433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18053.532200, 31017.715800, 827.504024, 827.504024, 0.000000, X, Y) && !ellipse(26216.460000, 25962.672000, 2084.656060, 2084.656060, 0.000000, X, Y) && !ellipse(23888.766235, 22414.643524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22080.788193, 25603.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19096.521988, 20146.523682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24452.875000, 26557.301666, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 05:23:05 2012] Writing fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19.gif
[Thu Aug  2 05:29:40 2012] Mean detx,y = (-1129.39, 567.04) 
[Thu Aug  2 05:29:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 05:30:17 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 05:30:17 2012] Setting source spectrum file to fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug  2 05:30:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Aug  2 07:03:47 2012] Updating aperture counts using extracted products
[Thu Aug  2 07:03:47 2012] Error reading totcts from fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug  2 07:03:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 07:03:47 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos1_xmm0109910101_pi300-10000_pass1_cl_src19.arf
[Thu Aug  2 07:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 07:03:47 2012] Updating source flux to 1.1e-13
[Thu Aug  2 07:03:49 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Thu Aug  2 07:03:49 2012] Flag c found in src. 19 procflags, skipping spectral fitting