[Sat Jul 28 10:05:53 2012] Detection parameters:
  Position = (220.6, 459.9) = 15 58 50.08 81 41 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.5 +/- 17.5
  Background counts = 11.1
  Rate = 0.01 +/- 0.001

[Sat Jul 28 10:05:56 2012] Off-axis axis estimate = 12.99'
[Sat Jul 28 10:29:34 2012] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 10:29:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 28 10:29:34 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Sat Jul 28 10:29:34 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.016
[Sat Jul 28 10:29:34 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.93"
[Sat Jul 28 10:46:53 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 28 10:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2.csv
[Sat Jul 28 10:46:53 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 28 10:46:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2.csv
[Sat Jul 28 10:46:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:46:53 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 28 10:46:53 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 28 10:46:53 2012] Fit fullrun_mos2_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jul 28 10:47:02 2012] Spatial fit model total counts = 289.999000, observed total counts = 290.000000
[Sat Jul 28 10:47:02 2012] Offset between fit and detection position for source 2 = 0.073843 pixels
[Sat Jul 28 10:47:02 2012] 290.810000 total counts/ 158.864000 bgd. counts: snr = 10.468476
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.073843 pixels
  Position = (220.7, 459.9) = 15 58 49.94 81 41 38.6
  Extent = 6.3 (5.2-7.6)", rotation angle = 0
  Source counts = 131.9 +/- 17.1
  Background counts = 158.9
  Rate = 0.009 +/- 0.001
[Sat Jul 28 10:47:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:47:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:47:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:47:02 2012] Source does appear to be extended
[Sat Jul 28 10:47:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 11:06:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 11:06:51 2012] Initial guess for spatial extent in simple fitting = 6.32"
[Sat Jul 28 11:06:51 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.048
[Sat Jul 28 11:06:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.32"
[Sat Jul 28 11:27:31 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jul 28 11:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2.csv
[Sat Jul 28 11:27:31 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jul 28 11:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2.csv
[Sat Jul 28 11:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:27:31 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 28 11:27:31 2012] fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 28 11:27:31 2012] Fit fullrun_mos2_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jul 28 11:27:43 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sat Jul 28 11:27:43 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 11:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 11:27:43 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 11:27:43 2012] Source does appear to be extended
[Sat Jul 28 11:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 11:57:15 2012] XMMSAS src. selection expression = ellipse(19151.886400, 39961.166640, 379.341011, 379.341011, 0.000000, X, Y)
[Sat Jul 28 11:57:15 2012] Writing source region out to fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 28 11:57:15 2012] Extracting stamp from image fullrun_mos2_xmm0109900101_pi300-10000_cl_sm2.00.img.gz, (199, 438) - (242, 482)
[Sat Jul 28 11:57:15 2012] XMMSAS bgd. selection expression = annulus(19151.886400, 39961.166640, 632.235018, 1264.470036, X, Y)
[Sat Jul 28 11:57:15 2012] Writing fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 28 12:01:28 2012] Mean detx,y = (-10099.21, -12377.45) 
[Sat Jul 28 12:01:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 12:01:41 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 12:01:42 2012] Setting source spectrum file to fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 12:01:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 28 12:10:18 2012] Updating aperture counts using extracted products
[Sat Jul 28 12:10:18 2012] Error reading totcts from fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 12:10:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 12:10:18 2012] Using photon index=1.80, rate=0.00938, arf fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 28 12:10:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 12:10:18 2012] Updating source flux to 3e-13
[Sat Jul 28 12:10:58 2012] Reading fit data from xmm0109900101/analysis//spectral/fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 28 12:10:58 2012] Spectral fit parameter nH value = 3.69937e+21
[Sat Jul 28 12:10:58 2012] Spectral fit parameter PhoIndex value = 0.930672
[Sat Jul 28 12:10:58 2012] Failed to get F(0.3-8.0) from xmm0109900101/analysis//spectral/fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 12:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 12:10:58 2012] Using Nh = 3.7e+21, photon index=0.93, rate=0.00938, arf fullrun_mos2_xmm0109900101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 28 12:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 12:10:58 2012] Updating source flux to 6.2e-13