[Sat Jul 28 10:05:12 2012] Detection parameters:
  Position = (279.3, 284.1) = 15 56 51.33 81 28 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1537.8 +/- 47.1
  Background counts = 16.5
  Rate = 0.1 +/- 0.003

[Sat Jul 28 10:05:14 2012] Off-axis axis estimate = 1.73'
[Sat Jul 28 10:16:35 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 10:16:35 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jul 28 10:16:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sat Jul 28 10:16:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jul 28 10:29:34 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 28 10:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 10:29:34 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 28 10:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1.csv
[Sat Jul 28 10:29:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 10:29:34 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 28 10:29:34 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 28 10:29:34 2012] Fit fullrun_mos1_xmm0109900101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 28 10:46:58 2012] Spatial fit model total counts = 1474.210000, observed total counts = 1475.000000
[Sat Jul 28 10:46:58 2012] Offset between fit and detection position for source 1 = 0.094621 pixels
[Sat Jul 28 10:46:58 2012] 1466.974000 total counts/ 393.914000 bgd. counts: snr = 54.065883
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.094621 pixels
  Position = (279.3, 284.2) = 15 56 51.30 81 28 56.3
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1073.1 +/- 38.3
  Background counts = 393.9
  Rate = 0.08 +/- 0.003
[Sat Jul 28 10:46:58 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 10:46:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 10:46:58 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 10:46:58 2012] Source does appear to be extended
[Sat Jul 28 10:46:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:52:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 10:52:54 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Sat Jul 28 10:52:54 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.917
[Sat Jul 28 10:52:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.69"
[Sat Jul 28 11:06:50 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 28 11:06:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 11:06:50 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 28 11:06:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 28 11:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 11:06:50 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 28 11:06:50 2012] fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 28 11:06:50 2012] Fit fullrun_mos1_xmm0109900101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 28 11:27:40 2012] Spatial fit model total counts = 1475.000000, observed total counts = 1475.000000
[Sat Jul 28 11:27:40 2012] Offset between fit and detection position for source 1 = 0.003762 pixels
[Sat Jul 28 11:27:40 2012] 1467.763000 total counts/ 392.883000 bgd. counts: snr = 54.228596
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003762 pixels
  Position = (279.3, 284.2) = 15 56 51.30 81 28 56.3
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1074.9 +/- 38.3
  Background counts = 392.9
  Rate = 0.08 +/- 0.003
[Sat Jul 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 11:27:40 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 11:27:40 2012] Source does appear to be extended
[Sat Jul 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 11:42:41 2012] Counts = 1074.880000, rescaling region sizes by 2.000000
[Sat Jul 28 11:42:41 2012] XMMSAS src. selection expression = ellipse(24252.204600, 24679.834000, 684.970820, 684.970820, 0.000000, X, Y)
[Sat Jul 28 11:42:41 2012] Writing source region out to fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 11:42:41 2012] Extracting stamp from image fullrun_mos1_xmm0109900101_pi300-10000_cl_sm2.00.img.gz, (240, 245) - (319, 324)
[Sat Jul 28 11:42:42 2012] XMMSAS bgd. selection expression = annulus(24252.204600, 24679.834000, 2283.236066, 4566.472131, X, Y)
[Sat Jul 28 11:42:42 2012] Writing fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 11:42:46 2012] Mean detx,y = (347.37, -241.05) 
[Sat Jul 28 11:42:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 11:43:16 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 11:43:16 2012] Setting source spectrum file to fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 11:43:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 28 12:10:17 2012] Updating aperture counts using extracted products
[Sat Jul 28 12:10:17 2012] Error reading totcts from fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 12:10:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 12:10:18 2012] Using photon index=1.80, rate=0.0765, arf fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 12:10:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 12:10:18 2012] Updating source flux to 7.2e-13
[Sat Jul 28 12:10:43 2012] Reading fit data from xmm0109900101/analysis//spectral/fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 28 12:10:43 2012] Spectral fit parameter nH value = 6.79246e+20
[Sat Jul 28 12:10:43 2012] Spectral fit parameter PhoIndex value = 2.13199
[Sat Jul 28 12:10:43 2012] Failed to get F(0.3-8.0) from xmm0109900101/analysis//spectral/fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 12:10:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 12:10:43 2012] Using Nh = 6.8e+20, photon index=2.13, rate=0.0765, arf fullrun_mos1_xmm0109900101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 12:10:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 12:10:43 2012] Updating source flux to 6.7e-13