[Sun Feb 12 09:34:10 2012] Detection parameters:
  Position = (398.5, 339.0) = 8 29 55.63 65 51 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.6 +/- 19.6
  Background counts = 199.0
  Rate = 0.006 +/- 0.001

[Sun Feb 12 09:34:11 2012] Off-axis axis estimate = 7.82'
[Sun Feb 12 09:38:53 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 09:38:53 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Feb 12 09:38:53 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.815
[Sun Feb 12 09:38:53 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.34"
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27.ximg exists
[Sun Feb 12 11:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27.csv
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Feb 12 11:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27.csv
[Sun Feb 12 11:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:28:56 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Feb 12 11:28:56 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Feb 12 11:28:56 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Feb 12 14:09:36 2012] Source 28 is offset by -6.157638 and -3.570606 pixels which is larger than
2 X fitted extent = 1.231798 x 1.231798, not incorporating fit results
[Sun Feb 12 14:09:36 2012] Source 28 is offset by -2.195294 and 5.651440 pixels which is larger than
2 X fitted extent = 1.543812 x 1.543812, not incorporating fit results
[Sun Feb 12 14:09:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:36 2012] Assessing source extent using major
[Sun Feb 12 14:09:36 2012] Source does appear to be extended
[Sun Feb 12 14:09:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:36 2012] Source is confused with source 24
[Sun Feb 12 14:09:58 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:09:58 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Feb 12 14:09:58 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.815
[Sun Feb 12 14:09:58 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.34"
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26.ximg exists
[Sun Feb 12 16:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26.csv
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Feb 12 16:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26.csv
[Sun Feb 12 16:37:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Feb 12 16:37:47 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Feb 12 19:38:02 2012] Warning, spatial fit 26 centroid is now closest to src. 24
[Sun Feb 12 19:38:02 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:02 2012] Assessing source extent using major
[Sun Feb 12 19:38:02 2012] Source does appear to be extended
[Sun Feb 12 19:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:38:19 2012] XMMSAS src. selection expression = ellipse(34617.017456, 29444.667267, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing source region out to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28_src.reg
[Sun Feb 12 19:38:19 2012] Extracting stamp from image fullrun_pn_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (361, 302) - (436, 377)
[Sun Feb 12 19:38:19 2012] XMMSAS bgd. selection expression = annulus(34617.017456, 29444.667267, 1087.500000, 2175.000000, X, Y) && !ellipse(33675.979492, 30512.209412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35241.281219, 32077.296082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.661285, 30994.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36552.068000, 31378.282000, 1781.096051, 1781.096051, 0.000000, X, Y) && !ellipse(35526.306580, 30914.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.519012, 30491.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33225.834000, 30432.076000, 808.848023, 808.848023, 0.000000, X, Y) && !ellipse(35556.030400, 29396.154000, 1722.704050, 1722.704050, 0.000000, X, Y) && !ellipse(33102.121460, 28570.164337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35873.005615, 27825.757843, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28.gif
[Sun Feb 12 20:01:13 2012] Mean detx,y = (8217.51, 711.28) 
[Sun Feb 12 20:01:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 20:01:30 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 20:01:31 2012] Setting source spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Feb 12 20:01:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon Feb 13 00:22:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 00:22:32 2012] rmf not generated due to insufficient counts
[Mon Feb 13 03:37:37 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:37 2012] Error reading totcts from fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Feb 13 03:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:38 2012] Using photon index=1.80, rate=0.00588, arf fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src28.arf
[Mon Feb 13 03:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:38 2012] Updating source flux to 2.5e-14
[Mon Feb 13 03:41:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting