[Sun Feb 12 09:34:10 2012] Detection parameters:
  Position = (409.6, 342.9) = 8 29 47.74 65 51 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 22.6
  Background counts = 192.0
  Rate = 0.007 +/- 0.001

[Sun Feb 12 09:34:11 2012] Off-axis axis estimate = 8.68'
[Sun Feb 12 09:38:53 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 09:38:53 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Sun Feb 12 09:38:53 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Sun Feb 12 09:38:53 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.77"
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23.ximg exists
[Sun Feb 12 11:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23.csv
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Feb 12 11:28:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23.csv
[Sun Feb 12 11:28:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Feb 12 11:28:55 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Feb 12 14:09:36 2012] Spatial fit model total counts = 626.582000, observed total counts = 641.000000
[Sun Feb 12 14:09:36 2012] Offset between fit and detection position for source 24 = 4.438832 pixels
[Sun Feb 12 14:09:36 2012] 645.349000 total counts/ 207.134000 bgd. counts: snr = 30.448194
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 4.438832 pixels
  Position = (409.2, 338.4) = 8 29 47.98 65 51 37.4
  Extent = 21.5 (21.5-43.1)", rotation angle = 0
  Source counts = 438.2 +/- 25.4
  Background counts = 207.1
  Rate = 0.06 +/- 0.004
[Sun Feb 12 14:09:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:36 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:09:36 2012] Source does appear to be extended
[Sun Feb 12 14:09:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:36 2012] Source is confused with source 19
[Sun Feb 12 14:09:36 2012] Source is confused with source 28
[Sun Feb 12 14:09:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:09:58 2012] Initial guess for spatial extent in simple fitting = 21.53"
[Sun Feb 12 14:09:58 2012] source mask rpix=5.0, npix_max = 118, mask sum = 104, frac = 0.875
[Sun Feb 12 14:09:58 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 21.53"
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23.ximg exists
[Sun Feb 12 16:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23.csv
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Feb 12 16:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23.csv
[Sun Feb 12 16:37:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Feb 12 16:37:47 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Feb 12 19:38:02 2012] Warning, spatial fit 23 centroid is now closest to src. 30
[Sun Feb 12 19:38:02 2012] Source 24 is offset by 2.295821 and -3.791676 pixels which is larger than
2 X fitted extent = 3.371600 x 3.371600, not incorporating fit results
[Sun Feb 12 19:38:02 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:02 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:02 2012] Source does appear to be extended
[Sun Feb 12 19:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:38:19 2012] XMMSAS src. selection expression = ellipse(35556.030400, 29396.154000, 1292.028037, 1292.028037, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing source region out to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24_src.reg
[Sun Feb 12 19:38:19 2012] Extracting stamp from image fullrun_pn_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (335, 264) - (484, 413)
[Sun Feb 12 19:38:19 2012] XMMSAS bgd. selection expression = annulus(35556.030400, 29396.154000, 2153.380062, 4306.760124, X, Y) && !ellipse(33675.979492, 30512.209412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35241.281219, 32077.296082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.661285, 30994.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36552.068000, 31378.282000, 1781.096051, 1781.096051, 0.000000, X, Y) && !ellipse(35526.306580, 30914.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.519012, 30491.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33225.834000, 30432.076000, 808.848023, 808.848023, 0.000000, X, Y) && !ellipse(34617.017456, 29444.667267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33102.121460, 28570.164337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35873.005615, 27825.757843, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24.gif
[Sun Feb 12 19:59:59 2012] Mean detx,y = (9195.14, 1035.86) 
[Sun Feb 12 20:00:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 20:00:38 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 20:00:38 2012] Setting source spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Feb 12 20:00:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Feb 13 03:37:37 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:37 2012] Error reading totcts from fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Feb 13 03:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:38 2012] Using photon index=1.80, rate=0.0608, arf fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src24.arf
[Mon Feb 13 03:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:38 2012] Updating source flux to 2e-13
[Mon Feb 13 03:41:39 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Mon Feb 13 03:41:39 2012] Flag c found in src. 24 procflags, skipping spectral fitting