[Sun Feb 12 09:34:10 2012] Detection parameters:
  Position = (309.0, 322.0) = 8 30 59.09 65 50 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2430.8 +/- 72.8
  Background counts = 426.0
  Rate = 0.08 +/- 0.003

[Sun Feb 12 09:34:11 2012] Off-axis axis estimate = 1.87'
[Sun Feb 12 09:38:53 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 09:38:53 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Feb 12 09:38:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sun Feb 12 09:38:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Sun Feb 12 11:28:54 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 11:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 11:28:54 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 11:28:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 11:28:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 11:28:55 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 11:28:55 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 14:09:36 2012] Spatial fit model total counts = 4841.710000, observed total counts = 4843.000000
[Sun Feb 12 14:09:36 2012] Offset between fit and detection position for source 1 = 1.207139 pixels
[Sun Feb 12 14:09:36 2012] 4870.220000 total counts/ 3691.500000 bgd. counts: snr = 19.400334
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.207139 pixels
  Position = (308.0, 322.6) = 8 30 59.80 65 50 29.9
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 1178.7 +/- 69.8
  Background counts = 3691.5
  Rate = 0.2 +/- 0.01
[Sun Feb 12 14:09:36 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:36 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:09:36 2012] Source does appear to be extended
[Sun Feb 12 14:09:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:09:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 14:09:58 2012] Initial guess for spatial extent in simple fitting = 14.73"
[Sun Feb 12 14:09:58 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.060
[Sun Feb 12 14:09:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.73"
[Sun Feb 12 16:37:46 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 16:37:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 16:37:46 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 16:37:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 16:37:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 16:37:47 2012] fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 16:37:47 2012] Fit fullrun_pn_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 19:38:02 2012] Warning, spatial fit 1 centroid is now closest to src. 25
[Sun Feb 12 19:38:02 2012] Spatial fit model total counts = 3483.450000, observed total counts = 3490.000000
[Sun Feb 12 19:38:02 2012] Offset between fit and detection position for source 1 = 1.105243 pixels
[Sun Feb 12 19:38:02 2012] Warning, changing simple spatial fit ID from 1 to 6
[Sun Feb 12 19:38:02 2012] 3409.150000 total counts/ 2364.150000 bgd. counts: snr = 21.492096
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.105243 pixels
  Position = (307.5, 321.6) = 8 31 0.10 65 50 25.5
  Extent = 20.0 (18.0-21.9)", rotation angle = 0
  Source counts = 1045.0 +/- 58.4
  Background counts = 2364.2
  Rate = 0.1 +/- 0.008
[Sun Feb 12 19:38:02 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:02 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:02 2012] Source does appear to be extended
[Sun Feb 12 19:38:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:38:02 2012] Source is confused with source 8
[Sun Feb 12 19:38:19 2012] Counts = 1045.000000, rescaling region sizes by 2.000000
[Sun Feb 12 19:38:19 2012] XMMSAS src. selection expression = ellipse(26708.138000, 27933.408000, 2398.764069, 2398.764069, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing source region out to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 19:38:19 2012] Extracting stamp from image fullrun_pn_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (170, 184) - (445, 459)
[Sun Feb 12 19:38:19 2012] XMMSAS bgd. selection expression = annulus(26708.138000, 27933.408000, 7995.880230, 15991.760460, X, Y) && !ellipse(10415.314285, 28302.016998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33675.979492, 30512.209412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.372400, 29474.598600, 781.040022, 781.040022, 0.000000, X, Y) && !ellipse(18773.720400, 11095.946200, 1168.080034, 1168.080034, 0.000000, X, Y) && !ellipse(26314.460000, 29113.562000, 582.183217, 582.183217, 0.000000, X, Y) && !ellipse(27057.910800, 28427.200000, 1061.016031, 1061.016031, 0.000000, X, Y) && !ellipse(25817.163600, 23676.277400, 571.986416, 407.325612, 74.977170, X, Y) && !ellipse(9614.630600, 21936.738000, 1423.440041, 1423.440041, 0.000000, X, Y) && !ellipse(37978.682800, 36673.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10082.769875, 21908.006851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37134.633057, 39444.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35241.281219, 32077.296082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.661285, 30994.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36552.068000, 31378.282000, 1781.096051, 1781.096051, 0.000000, X, Y) && !ellipse(35526.306580, 30914.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27117.405200, 29699.570000, 1321.800038, 1321.800038, 0.000000, X, Y) && !ellipse(34990.519012, 30491.152374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27908.122162, 30142.730225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33225.834000, 30432.076000, 808.848023, 808.848023, 0.000000, X, Y) && !ellipse(25472.620000, 30195.538000, 1274.592037, 1274.592037, 0.000000, X, Y) && !ellipse(35556.030400, 29396.154000, 1722.704050, 1722.704050, 0.000000, X, Y) && !ellipse(27823.785156, 29563.166534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34617.017456, 29444.667267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28661.373200, 29037.489800, 1299.584037, 523.661615, 344.415000, X, Y) && !ellipse(33102.121460, 28570.164337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28818.155800, 29062.940000, 1298.392037, 1298.392037, 0.000000, X, Y) && !ellipse(35873.005615, 27825.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.590942, 21863.176682, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:38:19 2012] Writing fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 19:38:33 2012] Mean detx,y = (465.11, -219.18) 
[Sun Feb 12 19:38:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:46:58 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:46:59 2012] Setting source spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 19:46:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 03:37:36 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:36 2012] Error reading totcts from fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 03:37:37 2012] No arf file for this source, not re-computing flux
[Mon Feb 13 03:41:39 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Feb 13 03:41:39 2012] Source 1 has no response, skipping
[Mon Feb 13 03:43:25 2012] xmm0109890401/analysis//spectral/fullrun_pn_xmm0109890401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete