[Sun Feb 12 09:35:01 2012] Detection parameters:
  Position = (321.2, 340.9) = 8 30 50.38 65 51 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.8 +/- 37.3
  Background counts = 362.5
  Rate = 0.009 +/- 0.0009

[Sun Feb 12 09:35:01 2012] Off-axis axis estimate = 3.49'
[Sun Feb 12 12:46:59 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:46:59 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Sun Feb 12 12:46:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.883
[Sun Feb 12 12:46:59 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.18"
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 14:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 14:09:26 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 12 14:09:47 2012] Warning, spatial fit 7 centroid is now closest to src. 18
[Sun Feb 12 14:09:47 2012] Spatial fit model total counts = 1615.500000, observed total counts = 1613.000000
[Sun Feb 12 14:09:47 2012] Offset between fit and detection position for source 7 = 4.905522 pixels
[Sun Feb 12 14:09:47 2012] Warning, changing simple spatial fit ID from 7 to 13
[Sun Feb 12 14:09:47 2012] 1577.002000 total counts/ 1361.590000 bgd. counts: snr = 5.837766
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 4.905522 pixels
  Position = (316.4, 340.5) = 8 30 53.85 65 51 47.4
  Extent = 16.7 (16.7-33.5)", rotation angle = 0
  Source counts = 215.4 +/- 39.7
  Background counts = 1361.6
  Rate = 0.02 +/- 0.003
[Sun Feb 12 14:09:47 2012] Source 7 is offset by -0.875977 and -2.889080 pixels which is larger than
2 X fitted extent = 0.978952 x 0.978952, not incorporating fit results
[Sun Feb 12 14:09:48 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:48 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:09:48 2012] Source does appear to be extended
[Sun Feb 12 14:09:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:48 2012] Source is confused with source 11
[Sun Feb 12 17:58:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 17:58:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 17:58:52 2012] Initial guess for spatial extent in simple fitting = 16.73"
[Sun Feb 12 17:58:52 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.072
[Sun Feb 12 17:58:52 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 16.73"
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src8.ximg exists
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Feb 12 19:37:57 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Feb 12 19:37:57 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Feb 12 19:38:09 2012] Spatial fit model total counts = 4268.940000, observed total counts = 4275.000000
[Sun Feb 12 19:38:09 2012] Offset between fit and detection position for source 7 = 4.763769 pixels
[Sun Feb 12 19:38:09 2012] 4139.748000 total counts/ 3674.110000 bgd. counts: snr = 7.681965
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 4.763769 pixels
  Position = (315.4, 335.8) = 8 30 54.51 65 51 27.1
  Extent = 33.5 (33.3-66.9)" x 12.0 (8.5-15.3)", rotation angle = 90 (90-90) degrees
  Source counts = 465.6 +/- 64.3
  Background counts = 3674.1
  Rate = 0.03 +/- 0.005
[Sun Feb 12 19:38:09 2012] Source 7 is offset by -0.923478 and -3.654046 pixels which is larger than
2 X fitted extent = 0.944115 x 0.944115, not incorporating fit results
[Sun Feb 12 19:38:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:09 2012] Source does appear to be extended
[Sun Feb 12 19:38:09 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.18
[Sun Feb 12 19:38:09 2012] Source is asymmetric
[Mon Feb 13 02:40:36 2012] XMMSAS src. selection expression = ellipse(27393.707400, 29166.168000, 2008.056058, 718.062021, 90.005000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing source region out to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7_src.reg
[Mon Feb 13 02:40:36 2012] Extracting stamp from image fullrun_mos2_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (200, 220) - (431, 451)
[Mon Feb 13 02:40:36 2012] XMMSAS bgd. selection expression = annulus(27393.707400, 29166.168000, 3346.760096, 6693.520193, X, Y) && !ellipse(26635.095780, 27832.804020, 1506.896043, 1506.896043, 0.000000, X, Y) && !ellipse(27359.610000, 28630.826000, 1236.840036, 356.353610, 111.382000, X, Y) && !ellipse(25830.333800, 23669.562000, 364.313610, 364.313610, 0.000000, X, Y) && !ellipse(27874.267883, 28917.551025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.028000, 29499.096000, 1298.448037, 1298.448037, 0.000000, X, Y) && !ellipse(27581.489838, 27294.414795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30078.890045, 29711.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.560516, 21891.897461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.287720, 30031.511047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.219131, 29342.119415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.416748, 30301.238129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32640.191498, 34953.085754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.453308, 29450.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.205414, 29963.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.823107, 30981.450712, 1779.568051, 1155.469491, 0.000000, X, Y) && !ellipse(26824.762800, 30796.930000, 996.576029, 996.576029, 0.000000, X, Y) && !ellipse(28396.427185, 27398.245026, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7.gif
[Mon Feb 13 02:47:41 2012] Mean detx,y = (-1059.82, 888.90) 
[Mon Feb 13 02:47:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 02:48:30 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 02:48:30 2012] Setting source spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 13 02:48:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Feb 13 03:37:41 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:41 2012] Error reading totcts from fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 13 03:37:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:42 2012] Using photon index=1.80, rate=0.0332, arf fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src7.arf
[Mon Feb 13 03:37:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:42 2012] Updating source flux to 3.4e-13
[Mon Feb 13 03:39:56 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Mon Feb 13 03:39:56 2012] Flag c found in src. 7 procflags, skipping spectral fitting