[Sun Feb 12 09:35:01 2012] Detection parameters:
  Position = (405.4, 369.3) = 8 29 50.61 65 53 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.8 +/- 24.6
  Background counts = 197.9
  Rate = 0.007 +/- 0.0009

[Sun Feb 12 09:35:01 2012] Off-axis axis estimate = 9.30'
[Sun Feb 12 12:46:59 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:46:59 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Sun Feb 12 12:46:59 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sun Feb 12 12:46:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.08"
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9.csv
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9.csv
[Sun Feb 12 14:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb 12 14:09:26 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Feb 12 14:09:47 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.118442 pixels away
[Sun Feb 12 14:09:48 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:48 2012] Assessing source extent using major
[Sun Feb 12 14:09:48 2012] Source does appear to be extended
[Sun Feb 12 14:09:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 17:58:52 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 17:58:52 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Sun Feb 12 17:58:52 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sun Feb 12 17:58:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.08"
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src10.ximg exists
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Feb 12 19:37:57 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 12 19:37:57 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 12 19:38:09 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.114471 pixels away
[Sun Feb 12 19:38:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:09 2012] Assessing source extent using major
[Sun Feb 12 19:38:09 2012] Source does appear to be extended
[Sun Feb 12 19:38:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 02:40:36 2012] XMMSAS src. selection expression = ellipse(35219.523254, 32076.778351, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing source region out to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb 13 02:40:36 2012] Extracting stamp from image fullrun_mos2_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (368, 332) - (443, 407)
[Mon Feb 13 02:40:36 2012] XMMSAS bgd. selection expression = annulus(35219.523254, 32076.778351, 1087.500000, 2175.000000, X, Y) && !ellipse(32640.191498, 34953.085754, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3.gif
[Mon Feb 13 02:49:03 2012] Mean detx,y = (-9455.71, 1574.30) 
[Mon Feb 13 02:49:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 02:49:14 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 02:49:14 2012] Setting source spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 02:49:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb 13 03:19:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 03:19:29 2012] rmf not generated due to insufficient counts
[Mon Feb 13 03:37:41 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:41 2012] Error reading totcts from fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 13 03:37:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:42 2012] Using photon index=1.80, rate=0.00683, arf fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src3.arf
[Mon Feb 13 03:37:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:42 2012] Updating source flux to 1.1e-13
[Mon Feb 13 03:39:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting