[Sun Feb 12 09:35:01 2012] Detection parameters:
  Position = (308.3, 320.9) = 8 30 59.60 65 50 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2199.3 +/- 65.7
  Background counts = 348.2
  Rate = 0.05 +/- 0.002

[Sun Feb 12 09:35:01 2012] Off-axis axis estimate = 1.78'
[Sun Feb 12 12:46:59 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:46:59 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Sun Feb 12 12:46:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Sun Feb 12 12:46:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 14:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 14:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 14:09:26 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 14:09:26 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 14:09:47 2012] Spatial fit model total counts = 3367.910000, observed total counts = 3363.000000
[Sun Feb 12 14:09:47 2012] Offset between fit and detection position for source 1 = 1.201521 pixels
[Sun Feb 12 14:09:47 2012] 3395.350000 total counts/ 2367.150000 bgd. counts: snr = 21.133173
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.201521 pixels
  Position = (307.4, 320.1) = 8 31 0.24 65 50 19.0
  Extent = 14.6 (14.4-14.6)", rotation angle = 0
  Source counts = 1028.2 +/- 58.3
  Background counts = 2367.2
  Rate = 0.07 +/- 0.004
[Sun Feb 12 14:09:48 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:48 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:09:48 2012] Source does appear to be extended
[Sun Feb 12 14:09:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 17:58:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 17:58:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 17:58:52 2012] Initial guess for spatial extent in simple fitting = 14.57"
[Sun Feb 12 17:58:52 2012] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.945
[Sun Feb 12 17:58:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.57"
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 19:37:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 19:37:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 19:37:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 19:37:57 2012] fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 19:37:57 2012] Fit fullrun_mos2_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 19:38:09 2012] Spatial fit model total counts = 6685.340000, observed total counts = 6668.000000
[Sun Feb 12 19:38:09 2012] Offset between fit and detection position for source 1 = 0.735485 pixels
[Sun Feb 12 19:38:09 2012] 6747.600000 total counts/ 4974.000000 bgd. counts: snr = 25.147962
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.735485 pixels
  Position = (306.7, 320.5) = 8 31 0.70 65 50 20.5
  Extent = 18.8 (17.6-21.0)", rotation angle = 0
  Source counts = 1773.6 +/- 82.1
  Background counts = 4974.0
  Rate = 0.1 +/- 0.006
[Sun Feb 12 19:38:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:09 2012] Source does appear to be extended
[Sun Feb 12 19:38:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:38:09 2012] Source is confused with source 11
[Sun Feb 12 19:38:09 2012] Source is confused with source 7
[Sun Feb 12 19:38:09 2012] Source is confused with source 12
[Mon Feb 13 02:40:36 2012] Counts = 1773.600000, rescaling region sizes by 2.000000
[Mon Feb 13 02:40:36 2012] XMMSAS src. selection expression = ellipse(26635.095780, 27832.804020, 2260.344065, 2260.344065, 0.000000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing source region out to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 02:40:36 2012] Extracting stamp from image fullrun_mos2_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (177, 191) - (437, 450)
[Mon Feb 13 02:40:36 2012] XMMSAS bgd. selection expression = annulus(26635.095780, 27832.804020, 7534.480217, 15068.960434, X, Y) && !ellipse(27359.610000, 28630.826000, 1236.840036, 356.353610, 111.382000, X, Y) && !ellipse(25830.333800, 23669.562000, 364.313610, 364.313610, 0.000000, X, Y) && !ellipse(27874.267883, 28917.551025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37995.890045, 36666.023041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.028000, 29499.096000, 1298.448037, 1298.448037, 0.000000, X, Y) && !ellipse(27393.707400, 29166.168000, 2677.408077, 957.416028, 90.005000, X, Y) && !ellipse(27581.489838, 27294.414795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30078.890045, 29711.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35219.523254, 32076.778351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.560516, 21891.897461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.287720, 30031.511047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.219131, 29342.119415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27529.416748, 30301.238129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32640.191498, 34953.085754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.453308, 29450.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18994.238000, 28120.382000, 1537.416044, 1537.416044, 0.000000, X, Y) && !ellipse(18070.388400, 29203.150200, 1272.136037, 1272.136037, 0.000000, X, Y) && !ellipse(18159.048400, 29576.434000, 1767.432051, 1767.432051, 0.000000, X, Y) && !ellipse(25908.205414, 29963.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.823107, 30981.450712, 1779.568051, 1155.469491, 0.000000, X, Y) && !ellipse(17512.200958, 27605.318726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17974.967255, 27858.613831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.762800, 30796.930000, 996.576029, 996.576029, 0.000000, X, Y) && !ellipse(28396.427185, 27398.245026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20033.561478, 14835.397766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16491.254000, 25586.442000, 1629.696047, 1629.696047, 0.000000, X, Y)
[Mon Feb 13 02:40:36 2012] Writing fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 02:40:45 2012] Mean detx,y = (-263.88, 245.32) 
[Mon Feb 13 02:40:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 02:45:14 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 02:45:15 2012] Setting source spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 02:45:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 03:37:41 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:41 2012] Error reading totcts from fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 03:37:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:42 2012] Using photon index=1.80, rate=0.127, arf fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 03:37:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:42 2012] Updating source flux to 1.1e-12
[Mon Feb 13 03:39:56 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Feb 13 03:41:39 2012] Reading fit data from xmm0109890401/analysis//spectral/fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 03:41:39 2012] Spectral fit parameter nH value = 8.25028e+20
[Mon Feb 13 03:41:39 2012] Spectral fit parameter PhoIndex value = 1.72005
[Mon Feb 13 03:41:39 2012] Failed to get F(0.3-8.0) from xmm0109890401/analysis//spectral/fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 03:41:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:41:39 2012] Using Nh = 8.3e+20, photon index=1.72, rate=0.127, arf fullrun_mos2_xmm0109890401_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 03:41:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:41:39 2012] Updating source flux to 1.2e-12