[Sun Feb 12 09:34:37 2012] Detection parameters:
  Position = (316.1, 310.5) = 8 30 54.06 65 49 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.4 +/- 29.7
  Background counts = 311.5
  Rate = 0.004 +/- 0.0007

[Sun Feb 12 09:34:37 2012] Off-axis axis estimate = 1.55'
[Sun Feb 12 11:28:56 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:28:56 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sun Feb 12 11:28:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Sun Feb 12 11:28:56 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.20"
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23.csv
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23.csv
[Sun Feb 12 12:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Feb 12 12:46:59 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Feb 12 14:09:42 2012] Source 24 is offset by 6.337520 and -7.118308 pixels which is larger than
2 X fitted extent = 6.623862 x 6.623862, not incorporating fit results
[Sun Feb 12 14:09:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:42 2012] Assessing source extent using major
[Sun Feb 12 14:09:42 2012] Source does appear to be extended
[Sun Feb 12 14:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 16:37:48 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:37:48 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Sun Feb 12 16:37:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Sun Feb 12 16:37:48 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.20"
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21.csv
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21.csv
[Sun Feb 12 17:58:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Feb 12 17:58:52 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Feb 12 19:38:06 2012] Source 24 is offset by -5.401331 and 2.986750 pixels which is larger than
2 X fitted extent = 1.685149 x 1.685149, not incorporating fit results
[Sun Feb 12 19:38:06 2012] Source 24 is offset by 6.261865 and -7.118308 pixels which is larger than
2 X fitted extent = 6.580138 x 6.580138, not incorporating fit results
[Sun Feb 12 19:38:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:06 2012] Assessing source extent using major
[Sun Feb 12 19:38:06 2012] Source does appear to be extended
[Sun Feb 12 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 00:55:39 2012] XMMSAS src. selection expression = ellipse(27450.448212, 26965.483215, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing source region out to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24_src.reg
[Mon Feb 13 00:55:39 2012] Extracting stamp from image fullrun_mos1_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (279, 273) - (354, 348)
[Mon Feb 13 00:55:39 2012] XMMSAS bgd. selection expression = annulus(27450.448212, 26965.483215, 1087.500000, 2175.000000, X, Y) && !ellipse(26763.864600, 27852.365800, 1172.864034, 1172.864034, 0.000000, X, Y) && !ellipse(26036.857513, 29592.671875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.586000, 28476.292000, 1261.336036, 1261.336036, 0.000000, X, Y) && !ellipse(26900.888000, 29234.078000, 1290.848037, 1290.848037, 0.000000, X, Y) && !ellipse(28502.346924, 29885.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.314000, 29248.142000, 1601.624046, 1601.624046, 0.000000, X, Y) && !ellipse(28874.781158, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.496000, 29738.710000, 1335.464038, 1335.464038, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24.gif
[Mon Feb 13 01:11:19 2012] Mean detx,y = (-714.78, 366.49) 
[Mon Feb 13 01:11:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 01:11:30 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 01:11:31 2012] Setting source spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Feb 13 01:11:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Feb 13 02:11:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 02:11:41 2012] rmf not generated due to insufficient counts
[Mon Feb 13 03:37:39 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:39 2012] Error reading totcts from fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Feb 13 03:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:41 2012] Using photon index=1.80, rate=0.00387, arf fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src24.arf
[Mon Feb 13 03:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:41 2012] Updating source flux to 3.7e-14
[Mon Feb 13 03:37:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting