[Sun Feb 12 09:34:37 2012] Detection parameters:
  Position = (216.7, 333.1) = 8 32 4.50 65 51 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 19.1
  Background counts = 161.0
  Rate = 0.003 +/- 0.0007

[Sun Feb 12 09:34:37 2012] Off-axis axis estimate = 6.44'
[Sun Feb 12 11:28:56 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:28:56 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Feb 12 11:28:56 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.015
[Sun Feb 12 11:28:56 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.65"
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28.csv
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28.csv
[Sun Feb 12 12:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Feb 12 12:46:59 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Feb 12 14:09:42 2012] Spatial fit model total counts = 314.609000, observed total counts = 316.000000
[Sun Feb 12 14:09:42 2012] Offset between fit and detection position for source 22 = 5.951916 pixels
[Sun Feb 12 14:09:42 2012] 308.824000 total counts/ 184.376000 bgd. counts: snr = 9.165069
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.951916 pixels
  Position = (217.7, 327.3) = 8 32 3.82 65 50 49.3
  Extent = 15.0 (10.3-19.3)", rotation angle = 0
  Source counts = 124.4 +/- 17.6
  Background counts = 184.4
  Rate = 0.008 +/- 0.001
[Sun Feb 12 14:09:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:42 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 14:09:42 2012] Source does appear to be extended
[Sun Feb 12 14:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:42 2012] Source is confused with source 25
[Sun Feb 12 16:37:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:37:48 2012] Initial guess for spatial extent in simple fitting = 14.95"
[Sun Feb 12 16:37:48 2012] source mask rpix=3.4, npix_max = 61, mask sum = 61, frac = 0.984
[Sun Feb 12 16:37:48 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 14.95"
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25.csv
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25.csv
[Sun Feb 12 17:58:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Feb 12 17:58:52 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Feb 12 19:38:06 2012] Warning, spatial fit 25 centroid is now closest to src. 3
[Sun Feb 12 19:38:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:06 2012] Source does appear to be extended
[Sun Feb 12 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 00:55:39 2012] XMMSAS src. selection expression = ellipse(18887.087200, 28422.498000, 897.011822, 897.011822, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing source region out to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22_src.reg
[Mon Feb 13 00:55:39 2012] Extracting stamp from image fullrun_mos1_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (166, 276) - (269, 379)
[Mon Feb 13 00:55:39 2012] XMMSAS bgd. selection expression = annulus(18887.087200, 28422.498000, 1495.019703, 2990.039406, X, Y) && !ellipse(17291.578000, 25248.560000, 1423.832041, 1423.832041, 0.000000, X, Y) && !ellipse(17788.190000, 31090.844000, 1633.920047, 1633.920047, 0.000000, X, Y) && !ellipse(19220.198800, 27577.708000, 1475.912771, 1475.912771, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22.gif
[Mon Feb 13 01:13:05 2012] Mean detx,y = (3103.21, -7523.82) 
[Mon Feb 13 01:13:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 01:13:26 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 01:13:26 2012] Setting source spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 13 01:13:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Feb 13 03:37:39 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:39 2012] Error reading totcts from fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 13 03:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:41 2012] Using photon index=1.80, rate=0.00793, arf fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src22.arf
[Mon Feb 13 03:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:41 2012] Updating source flux to 1.2e-13
[Mon Feb 13 03:37:44 2012] Flag c found in src. 22 procflags, skipping spectral fitting