[Sun Feb 12 09:34:37 2012] Detection parameters:
  Position = (333.4, 338.2) = 8 30 41.77 65 51 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 29.2
  Background counts = 341.0
  Rate = 0.004 +/- 0.0007

[Sun Feb 12 09:34:37 2012] Off-axis axis estimate = 3.84'
[Sun Feb 12 11:28:56 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:28:56 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Feb 12 11:28:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Sun Feb 12 11:28:56 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.35"
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25.csv
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25.csv
[Sun Feb 12 12:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Feb 12 12:46:59 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Feb 12 14:09:42 2012] Warning, spatial fit 25 centroid is now closest to src. 18
[Sun Feb 12 14:09:42 2012] Source 20 is offset by 5.024076 and 3.792385 pixels which is larger than
2 X fitted extent = 1.566115 x 1.566115, not incorporating fit results
[Sun Feb 12 14:09:42 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.728511 pixels away
[Sun Feb 12 14:09:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:42 2012] Assessing source extent using major
[Sun Feb 12 14:09:42 2012] Source does appear to be extended
[Sun Feb 12 14:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:42 2012] Source is confused with source 18
[Sun Feb 12 16:37:48 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:37:48 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Feb 12 16:37:48 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.068
[Sun Feb 12 16:37:48 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.35"
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22.csv
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Feb 12 17:58:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22.csv
[Sun Feb 12 17:58:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Feb 12 17:58:52 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Feb 12 19:38:06 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 36.852140 pixels away
[Sun Feb 12 19:38:06 2012] Spatial fit model total counts = 1495.070000, observed total counts = 1494.000000
[Sun Feb 12 19:38:06 2012] Offset between fit and detection position for source 20 = 3.325235 pixels
[Sun Feb 12 19:38:06 2012] 1377.019000 total counts/ 1184.080000 bgd. counts: snr = 5.606986
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.325235 pixels
  Position = (330.1, 338.4) = 8 30 44.12 65 51 38.5
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 192.9 +/- 37.1
  Background counts = 1184.1
  Rate = 0.01 +/- 0.002
[Sun Feb 12 19:38:06 2012] Spatial fit model total counts = 2568.100000, observed total counts = 2568.000000
[Sun Feb 12 19:38:06 2012] Offset between fit and detection position for source 20 = 2.745761 pixels
[Sun Feb 12 19:38:06 2012] Warning, changing simple spatial fit ID from 22 to 27
[Sun Feb 12 19:38:06 2012] 2539.365000 total counts/ 2256.700000 bgd. counts: snr = 5.950249
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.745761 pixels
  Position = (327.9, 336.7) = 8 30 45.66 65 51 31.1
  Extent = 20.0 (12.9-33.4)", rotation angle = 0
  Source counts = 282.7 +/- 50.4
  Background counts = 2256.7
  Rate = 0.02 +/- 0.003
[Sun Feb 12 19:38:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:38:06 2012] Source does appear to be extended
[Sun Feb 12 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 00:55:39 2012] XMMSAS src. selection expression = ellipse(28480.314000, 29248.142000, 1201.218035, 1201.218035, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing source region out to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20_src.reg
[Mon Feb 13 00:55:39 2012] Extracting stamp from image fullrun_mos1_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (259, 268) - (397, 406)
[Mon Feb 13 00:55:39 2012] XMMSAS bgd. selection expression = annulus(28480.314000, 29248.142000, 2002.030058, 4004.060115, X, Y) && !ellipse(26763.864600, 27852.365800, 1172.864034, 1172.864034, 0.000000, X, Y) && !ellipse(26036.857513, 29592.671875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.586000, 28476.292000, 1261.336036, 1261.336036, 0.000000, X, Y) && !ellipse(26900.888000, 29234.078000, 1290.848037, 1290.848037, 0.000000, X, Y) && !ellipse(28502.346924, 29885.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27969.400238, 30207.040344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26655.200562, 30217.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33734.988000, 28670.078000, 1598.360046, 1598.360046, 0.000000, X, Y) && !ellipse(26965.031860, 30644.692719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.448212, 26965.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.781158, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.496000, 29738.710000, 1335.464038, 1335.464038, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20.gif
[Mon Feb 13 01:11:35 2012] Mean detx,y = (1042.96, 1872.67) 
[Mon Feb 13 01:11:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 01:11:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 01:11:53 2012] Setting source spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb 13 01:11:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Feb 13 03:37:39 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:39 2012] Error reading totcts from fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb 13 03:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:41 2012] Using photon index=1.80, rate=0.018, arf fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src20.arf
[Mon Feb 13 03:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:41 2012] Updating source flux to 1.6e-13
[Mon Feb 13 03:37:44 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Mon Feb 13 03:37:44 2012] Flag c found in src. 20 procflags, skipping spectral fitting