[Sun Feb 12 09:34:36 2012] Detection parameters:
  Position = (396.7, 359.4) = 8 29 56.84 65 53 4.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 1268.7 +/- 249.8
  Background counts = 745.2
  Rate = 0.05 +/- 0.009

[Sun Feb 12 09:34:37 2012] Off-axis axis estimate = 8.38'
[Sun Feb 12 11:28:56 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:28:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 11:28:56 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Feb 12 11:28:56 2012] source mask rpix=2.4, npix_max = 34, mask sum = 19, frac = 0.549
[Sun Feb 12 11:28:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.62"
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 12:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 12:46:59 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 14:09:42 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.504059 pixels away
[Sun Feb 12 14:09:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:42 2012] Assessing source extent using major
[Sun Feb 12 14:09:42 2012] Source does appear to be extended
[Sun Feb 12 14:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:42 2012] Source is confused with source 12
[Sun Feb 12 16:37:48 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:37:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 16:37:48 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Feb 12 16:37:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 19, frac = 0.549
[Sun Feb 12 16:37:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.62"
[Sun Feb 12 17:58:51 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 17:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 17:58:51 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 17:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 17:58:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 17:58:52 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 19:38:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.138777 pixels away
[Sun Feb 12 19:38:06 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.660487 pixels away
[Sun Feb 12 19:38:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:06 2012] Assessing source extent using major
[Sun Feb 12 19:38:06 2012] Source does appear to be extended
[Sun Feb 12 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 00:55:38 2012] Counts = 1268.699951, rescaling region sizes by 2.000000
[Mon Feb 13 00:55:38 2012] XMMSAS src. selection expression = ellipse(34460.506134, 31215.290375, 2610.000000, 2610.000000, 0.000000, X, Y)
[Mon Feb 13 00:55:38 2012] Writing source region out to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 13 00:55:38 2012] Extracting stamp from image fullrun_mos1_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (247, 209) - (547, 509)
[Mon Feb 13 00:55:38 2012] XMMSAS bgd. selection expression = annulus(34460.506134, 31215.290375, 8700.000000, 17400.000000, X, Y) && !ellipse(26763.864600, 27852.365800, 1172.864034, 1172.864034, 0.000000, X, Y) && !ellipse(25826.306800, 23675.340000, 369.839211, 369.839211, 0.000000, X, Y) && !ellipse(26036.857513, 29592.671875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.586000, 28476.292000, 1261.336036, 1261.336036, 0.000000, X, Y) && !ellipse(26900.888000, 29234.078000, 1290.848037, 1290.848037, 0.000000, X, Y) && !ellipse(37965.667847, 36674.853668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28502.346924, 29885.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27969.400238, 30207.040344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26655.200562, 30217.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35226.393400, 32090.474400, 635.647218, 377.441611, 239.870000, X, Y) && !ellipse(37086.606800, 39496.529260, 618.209618, 618.209618, 0.000000, X, Y) && !ellipse(35707.740662, 36323.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33734.988000, 28670.078000, 1598.360046, 1598.360046, 0.000000, X, Y) && !ellipse(17291.578000, 25248.560000, 1423.832041, 1423.832041, 0.000000, X, Y) && !ellipse(26965.031860, 30644.692719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17788.190000, 31090.844000, 1633.920047, 1633.920047, 0.000000, X, Y) && !ellipse(27450.448212, 26965.483215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.314000, 29248.142000, 1601.624046, 1601.624046, 0.000000, X, Y) && !ellipse(28874.781158, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35423.806519, 24650.533966, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18887.087200, 28422.498000, 1196.015762, 1196.015762, 0.000000, X, Y) && !ellipse(19220.198800, 27577.708000, 1475.912771, 1475.912771, 0.000000, X, Y) && !ellipse(29380.496000, 29738.710000, 1335.464038, 1335.464038, 0.000000, X, Y) && !ellipse(35649.165405, 25552.423523, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(36587.458000, 30442.604000, 1319.264038, 1319.264038, 0.000000, X, Y)
[Mon Feb 13 00:55:38 2012] Writing fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2.gif
[Mon Feb 13 00:55:46 2012] Mean detx,y = (1207.99, 8367.28) 
[Mon Feb 13 00:55:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 01:02:13 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 01:02:14 2012] Setting source spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 01:02:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 13 01:15:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 01:15:28 2012] rmf not generated due to insufficient counts
[Mon Feb 13 03:37:38 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:38 2012] Error reading totcts from fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 03:37:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:39 2012] Using photon index=1.80, rate=0.0472, arf fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2.arf
[Mon Feb 13 03:37:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:39 2012] Updating source flux to 6.1e-13
[Mon Feb 13 03:37:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Feb 13 03:39:56 2012] xmm0109890401/analysis//spectral/fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete