[Sun Feb 12 09:34:37 2012] Detection parameters:
  Position = (322.0, 347.8) = 8 30 49.81 65 52 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 290.7 +/- 32.5
  Background counts = 321.3
  Rate = 0.008 +/- 0.0009

[Sun Feb 12 09:34:37 2012] Off-axis axis estimate = 3.96'
[Sun Feb 12 11:28:56 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:28:56 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Sun Feb 12 11:28:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.675
[Sun Feb 12 11:28:56 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.41"
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 12:46:58 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 12 12:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 12:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 12 12:46:59 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 12 12:46:59 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 12 14:09:42 2012] Warning, spatial fit 11 centroid is now closest to src. 4
[Sun Feb 12 14:09:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 14:09:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 14:09:42 2012] Assessing source extent using major
[Sun Feb 12 14:09:42 2012] Source does appear to be extended
[Sun Feb 12 14:09:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 14:09:42 2012] Source is confused with source 4
[Sun Feb 12 16:37:48 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 16:37:48 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Sun Feb 12 16:37:48 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.675
[Sun Feb 12 16:37:48 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.41"
[Sun Feb 12 17:58:51 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11.ximg exists
[Sun Feb 12 17:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11.csv
[Sun Feb 12 17:58:51 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Feb 12 17:58:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11.csv
[Sun Feb 12 17:58:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Feb 12 17:58:52 2012] fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Feb 12 17:58:52 2012] Fit fullrun_mos1_xmm0109890401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Feb 12 19:38:06 2012] Source 16 is offset by -5.699262 and -5.910249 pixels which is larger than
2 X fitted extent = 1.403890 x 1.403890, not incorporating fit results
[Sun Feb 12 19:38:06 2012] Source 16 is offset by 4.277934 and 1.151728 pixels which is larger than
2 X fitted extent = 1.127982 x 1.127982, not incorporating fit results
[Sun Feb 12 19:38:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:38:06 2012] Assessing source extent using major
[Sun Feb 12 19:38:06 2012] Source does appear to be extended
[Sun Feb 12 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 00:55:39 2012] XMMSAS src. selection expression = ellipse(27969.400238, 30207.040344, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing source region out to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16_src.reg
[Mon Feb 13 00:55:39 2012] Extracting stamp from image fullrun_mos1_xmm0109890401_pi300-10000_cl_sm2.00.img.gz, (285, 310) - (360, 385)
[Mon Feb 13 00:55:39 2012] XMMSAS bgd. selection expression = annulus(27969.400238, 30207.040344, 1087.500000, 2175.000000, X, Y) && !ellipse(26763.864600, 27852.365800, 1172.864034, 1172.864034, 0.000000, X, Y) && !ellipse(26036.857513, 29592.671875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27074.586000, 28476.292000, 1261.336036, 1261.336036, 0.000000, X, Y) && !ellipse(26900.888000, 29234.078000, 1290.848037, 1290.848037, 0.000000, X, Y) && !ellipse(28502.346924, 29885.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26655.200562, 30217.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.031860, 30644.692719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28480.314000, 29248.142000, 1601.624046, 1601.624046, 0.000000, X, Y) && !ellipse(28874.781158, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.496000, 29738.710000, 1335.464038, 1335.464038, 0.000000, X, Y)
[Mon Feb 13 00:55:39 2012] Writing fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16.gif
[Mon Feb 13 01:07:51 2012] Mean detx,y = (2070.92, 1784.82) 
[Mon Feb 13 01:07:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 01:08:02 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 01:08:02 2012] Setting source spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Feb 13 01:08:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Feb 13 01:59:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 01:59:36 2012] rmf not generated due to insufficient counts
[Mon Feb 13 03:37:38 2012] Updating aperture counts using extracted products
[Mon Feb 13 03:37:38 2012] Error reading totcts from fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Feb 13 03:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 03:37:41 2012] Using photon index=1.80, rate=0.00773, arf fullrun_mos1_xmm0109890401_pi300-10000_pass1_cl_src16.arf
[Mon Feb 13 03:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 03:37:41 2012] Updating source flux to 7.9e-14
[Mon Feb 13 03:37:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting