[Tue Jul 17 11:24:38 2012] Detection parameters:
  Position = (376.4, 312.3) = 4 13 12.15 10 28 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2805.1 +/- 72.6
  Background counts = 1048.3
  Rate = 0.04 +/- 0.001

[Tue Jul 17 11:24:42 2012] Off-axis axis estimate = 5.74'
[Tue Jul 17 11:40:08 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:40:08 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Tue Jul 17 11:40:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.898
[Tue Jul 17 11:40:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.30"
[Tue Jul 17 15:30:42 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jul 17 15:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6.csv
[Tue Jul 17 15:30:42 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jul 17 15:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6.csv
[Tue Jul 17 15:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 15:30:43 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jul 17 15:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 17 15:30:43 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jul 17 15:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 17 15:30:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:23 2012] Warning, spatial fit 6 centroid is now closest to src. 26
[Tue Jul 17 23:41:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:24 2012] Assessing source extent using major
[Tue Jul 17 23:41:24 2012] Source does appear to be extended
[Tue Jul 17 23:41:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:41:56 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 23:41:56 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Tue Jul 17 23:41:56 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.898
[Tue Jul 17 23:41:56 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.30"
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6.csv
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6.csv
[Wed Jul 18 06:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 18 06:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:51:03 2012] Warning, spatial fit 6 centroid is now closest to src. 26
[Wed Jul 18 11:51:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:03 2012] Assessing source extent using major
[Wed Jul 18 11:51:03 2012] Source does appear to be extended
[Wed Jul 18 11:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 11:51:33 2012] Counts = 2805.104492, rescaling region sizes by 2.000000
[Wed Jul 18 11:51:33 2012] XMMSAS src. selection expression = ellipse(32697.370209, 27119.039490, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing source region out to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 18 11:51:33 2012] Extracting stamp from image fullrun_pn_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (301, 237) - (451, 387)
[Wed Jul 18 11:51:33 2012] XMMSAS bgd. selection expression = annulus(32697.370209, 27119.039490, 4350.000000, 8700.000000, X, Y) && !ellipse(28873.321800, 26942.659200, 3707.712107, 3707.712107, 0.000000, X, Y) && !ellipse(41581.692963, 29699.929749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.361755, 28708.812622, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28746.745026, 28527.028076, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31028.612610, 28229.962158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.725891, 26140.674469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32273.593018, 26314.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32594.634000, 25388.544000, 1469.272042, 1469.272042, 0.000000, X, Y) && !ellipse(31727.591553, 23276.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40096.719147, 19470.319580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.501312, 32043.210815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.971405, 30999.579865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.122894, 29249.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39648.945801, 29168.199066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.209351, 27914.796906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.804901, 28134.715637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33358.785797, 26313.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24698.135986, 26392.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.349915, 22589.941833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.811798, 32386.068024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30210.215759, 31623.020569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26081.990000, 31696.642000, 1372.288039, 1372.288039, 0.000000, X, Y) && !ellipse(24294.348511, 31000.286102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34107.142975, 31034.270477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23875.576050, 30028.850708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.008545, 29525.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33318.185089, 28670.558960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.152000, 27231.940000, 1188.008034, 1188.008034, 0.000000, X, Y) && !ellipse(24615.110565, 26764.837341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24089.903290, 25707.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34153.093567, 25350.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33367.077454, 24922.958557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25027.598572, 24757.398895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24430.570099, 24932.540558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25264.986000, 24012.108000, 1128.496032, 1128.496032, 0.000000, X, Y) && !ellipse(32392.564000, 24020.462000, 1526.592044, 1526.592044, 0.000000, X, Y) && !ellipse(26514.959259, 23293.784790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.516541, 22680.539398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.748993, 22327.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36935.983765, 19674.667892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28349.406616, 19234.383057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31414.537048, 19030.581680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27321.515600, 16895.070000, 1614.848046, 1614.848046, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7.gif
[Wed Jul 18 12:43:41 2012] Mean detx,y = (5261.11, -607.10) 
[Wed Jul 18 12:43:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 12:46:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 12:46:01 2012] Setting source spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 18 12:46:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul 19 04:29:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 04:29:48 2012] rmf not generated due to insufficient counts
[Fri Jul 20 12:25:49 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:25:49 2012] Error reading totcts from fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 20 12:25:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:25:53 2012] Using photon index=1.80, rate=0.0413, arf fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src7.arf
[Fri Jul 20 12:25:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:25:53 2012] Updating source flux to 1.3e-13
[Fri Jul 20 12:35:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting