[Tue Jul 17 11:24:39 2012] Detection parameters:
  Position = (253.0, 247.8) = 4 13 48.55 10 23 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1621.3 +/- 54.4
  Background counts = 314.5
  Rate = 0.02 +/- 0.0008

[Tue Jul 17 11:24:42 2012] Off-axis axis estimate = 4.94'
[Tue Jul 17 11:40:08 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:40:08 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Tue Jul 17 11:40:08 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.158
[Tue Jul 17 11:40:08 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.90"
[Tue Jul 17 15:30:42 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jul 17 15:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12.csv
[Tue Jul 17 15:30:42 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jul 17 15:30:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12.csv
[Tue Jul 17 15:30:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 15:30:43 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jul 17 15:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Jul 17 15:30:43 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jul 17 15:30:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Jul 17 15:30:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:23 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.757978 pixels away
[Tue Jul 17 23:41:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:24 2012] Assessing source extent using major
[Tue Jul 17 23:41:24 2012] Source does appear to be extended
[Tue Jul 17 23:41:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:41:56 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 23:41:56 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Tue Jul 17 23:41:56 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.158
[Tue Jul 17 23:41:56 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.90"
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13.csv
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13.csv
[Wed Jul 18 06:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jul 18 06:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:51:03 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.641251 pixels away
[Wed Jul 18 11:51:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:03 2012] Assessing source extent using major
[Wed Jul 18 11:51:03 2012] Source does appear to be extended
[Wed Jul 18 11:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 11:51:33 2012] Counts = 1621.262329, rescaling region sizes by 2.000000
[Wed Jul 18 11:51:33 2012] XMMSAS src. selection expression = ellipse(21958.914383, 21507.944382, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing source region out to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16_src.reg
[Wed Jul 18 11:51:33 2012] Extracting stamp from image fullrun_pn_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (178, 173) - (328, 323)
[Wed Jul 18 11:51:33 2012] XMMSAS bgd. selection expression = annulus(21958.914383, 21507.944382, 4350.000000, 8700.000000, X, Y) && !ellipse(28873.321800, 26942.659200, 3707.712107, 3707.712107, 0.000000, X, Y) && !ellipse(27614.361755, 28708.812622, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28746.745026, 28527.028076, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31028.612610, 28229.962158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.725891, 26140.674469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22534.135773, 25280.365326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27616.289930, 15849.600000, 465.396813, 465.396813, 0.000000, X, Y) && !ellipse(26771.971405, 30999.579865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.122894, 29249.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24681.804901, 28134.715637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24698.135986, 26392.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26856.242035, 13262.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.349915, 22589.941833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19937.716248, 20429.752914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22565.935300, 15773.720000, 616.928818, 317.244809, 35.743197, X, Y) && !ellipse(24294.348511, 31000.286102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23875.576050, 30028.850708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.152000, 27231.940000, 1188.008034, 1188.008034, 0.000000, X, Y) && !ellipse(24615.110565, 26764.837341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24089.903290, 25707.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25027.598572, 24757.398895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24430.570099, 24932.540558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25264.986000, 24012.108000, 1128.496032, 1128.496032, 0.000000, X, Y) && !ellipse(26514.959259, 23293.784790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.748993, 22327.306335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14512.501068, 22212.028946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27369.294586, 13338.634293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16349.453445, 21340.352295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28349.406616, 19234.383057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31414.537048, 19030.581680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.839294, 17173.809509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27321.515600, 16895.070000, 1614.848046, 1614.848046, 0.000000, X, Y) && !ellipse(26917.501526, 14912.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26682.328000, 14396.630000, 1765.120051, 1765.120051, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16.gif
[Wed Jul 18 13:04:57 2012] Mean detx,y = (-4367.05, 6407.18) 
[Wed Jul 18 13:05:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 13:07:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 13:07:46 2012] Setting source spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jul 18 13:07:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jul 19 04:36:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 04:36:34 2012] rmf not generated due to insufficient counts
[Fri Jul 20 12:25:50 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:25:50 2012] Error reading totcts from fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 20 12:25:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:25:54 2012] Using photon index=1.80, rate=0.0229, arf fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src16.arf
[Fri Jul 20 12:25:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:25:54 2012] Updating source flux to 7.8e-14
[Fri Jul 20 12:35:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting